AVI 250 (serv.man9) - Harman Kardon Audio User Guide / Operation Manual. Page 14

Remote Control Functions

8

NOTE: The ability of the remote to
control source equipment, such as
tuners, CD players and tape decks
may vary with the compatibility of the
product under control with 
the preprogrammed codes in the
AVI 250’s remote. If the unit does 
not respond with the function
described here, it may be neces-sary
to reprogram the remote using the
“Learning” function described
elsewhere in this manual.

a Use/Learn: This switch selects
the operation mode of the remote
control. Slide it to the left for normal
operation. Slide it to the right when
the remote is being programmed.

b Main Power: Press these 
buttons to turn the unit on or off.

c Source Selection: Pressing one
of these buttons selects the input
source that will be listened to through
the receiver. When a source is
selected the remote’s transport and
numeric number buttons will also
transmit the commands needed to
control that machine. 

d Source Power: Press these
buttons to control power for the last
source device selected. 

e Surround Mode Selection:
Press one of these buttons to select a
surround mode for the current
listening session.

f Main Volume: These buttons
control the unit’s volume. Note that all
channels are controlled
simultaneously.

g TV Volume: These buttons adjust
the volume for TV using the remote
control codes programmed into the
remote for a TV set or cable box.
These buttons control the TV set only,
regardless of which source is
selected. This enables you to control
the audio level of a TV set even when
the receiver is not in use.

h Mute: Press this button to
temporarily cut the unit’s audio output.
Press it again to return to the previous
volume level.

i Transport Controls: These 
buttons control the tape or disc
motion of the last playback source
selected with the Source Selection
buttons 

c. Use them as you would

the Play, Stop, Pause, Reverse Play
and Record buttons on any VCR, CD
or LD remote control.

j Tune/Search & Fast Forward:
(These buttons have multiple
functions, which vary according to the
input device selected.)

a. When a TUNER has been selected,

these buttons are used to tune
stations.

b. When CD, LD or VCR is the input

source, these buttons act as 
the Fast Scan Forward 

—

or Fast Scan Reverse 

‚

controls.

k Channel/Skip: (These buttons
have multiple functions, which
vary according to the input device
selected.)

a. When TUNER has been selected,

these buttons will scroll up 

·

or

down 

‡

through the stations that

have been programmed in preset
memory.

b. When TV or VCR is selected, they

are the channel up 

·

or channel

down 

‡

tuning buttons.

c. When CD or LD is selected 

these buttons act as forward 
and reverse “Skip” buttons to move
to the next track or chapter on the
disc.

d. When a cassette player has been

selected as Tape 1 or Tape 2,
these buttons move the tape
forward 

·

or backwards 

‡

to 

the next selection using the Music
Scan feature.

l Disc/Deck/Ant: (These buttons
have multiple functions, which
vary according to the input device
selected.)

a. When CD is selected and the unit is

a CD changer, these buttons will
change to the next disc 

∏

or

previous disc 

Â

.

b. When Tape 1 or Tape 2 is the

input source, and the tape machine
is a dual cassette deck, these
buttons will switch between the “A”
and “B” sides. 

Engelsk manual AVI250  11/01/98 8:52  Side 8