AVI 250 (serv.man9) - Harman Kardon Audio User Guide / Operation Manual. Page 11

Front Panel Information Display

5

¡ “Visual” Indicators: These

indicators display which video source is
being fed to the video monitor output.

™ Test: This indicator flashes when

the output levels are being set using
the built in test signal generator.

£ Volume Indication: The last two

indicators on the information display
indicate the volume level. Note that

0dB

is the reference level, not an

indication that there is no output.

¢ Main Information Display: This

ten digit display shows messages
relating to the status, input source,
surround mode, volume level or other
aspects of the unit’s operation.

∞ DISP: This indicator lights when

the FL display has been turned off
using the Display button 

) to remind

you that the unit is still 
turned on.

§ Multi: This indicator signifies that

the unit is sending a program source
to a remote room location. Note that it
may be illuminated even when the unit
is “off” in the main listening room,
signifying that operation continues at
another location. When a remote
command is being received via the
Multi IR connection, this indicator will
flash.

¶ Copy Indicators: The 

TAPE

COPY

indicator lights when an input

other than the current source has
been selected to copy Tape 1. The

VCR COPY1

indicator signifies that the

input to VCR 1 is other than the
currently selected source.

• Mode Status: These indicators

display the currently selected 
surround mode.

Engelsk manual AVI250  11/01/98 8:52  Side 5