Read Sharp AR-LC4 (serv.man8) Service Manual online
AR-LC4 UNPACKING AND INSTALLATION 7 - 1
7. UNPACKING AND INSTALLATION
WARNING
• The unpacking and set-up procedure must be
done by a qualified service technician.
1) UNPLUG
2) REMOVE
3) REMOVE
4) REMOVE
5) REMOVE
6) REMOVE
7) REMOVE
5
13
12
13
11
28
11
12
13
25-a
28
20
17
AR-LC4 UNPACKING AND INSTALLATION 7 - 2
8) REMOVE
9) PULL
10) REMOVE
11) INSTALL
12) INSTALL
13) INSTALL
14) REMOVE
When the finisher is already installed in the
machine, remove the metal sheet.
machine, remove the metal sheet.
15) REMOVE
3
1
2
AR-LC4 UNPACKING AND INSTALLATION 7 - 3
16) INSTALL
17) INSTALL
18) INSTALL
19) INSTALL
If the metal sheet was removed in step 14,
attach it again.
attach it again.
20) INSTALL
21) ADJUSTMENT
22) EXTEND
23) PLACE
AR-LC4 UNPACKING AND INSTALLATION 7 - 4
24) SLIDE
Do not close the latch.
25-a) INSTALL
When the screw and the hole do not match,
try the procedure again from step 25-b to
25-f.
try the procedure again from step 25-b to
25-f.
25-b) REMOVE
25-c) REMOVE
25-d) INSTALL
25-e) INSTALL
25-f) INSTALL
26) REMOVE
2
1
1
2