SB 200 (serv.man3) - JBL Audio EMC - CB Certificate (repair manual). Page 7

Read JBL SB 200 (serv.man3) EMC - CB Certificate online

Page 7 of 70 
Report No.: 350-120155AX 
 
  
 
 
 
 
 
IEC 60065 
Clause 
Requirement + Test 
Result - Remark 
Verdict
 
TRF No. IEC60065K 
5.4 
Instructions for use 
Suitable instructions were 
provided in the user manual. 
And the suitable official 
language will be provided in 
user manual when it’s exported 
to country. 
Pass 
5.4.1 
 
a) Mains powered equipment not exposed to 
dripping or splashing. Warning concerning objects 
filled with liquid, etc.  
See remark 1). 
Pass 
 
b) Hazardous live terminals, instructions for wiring   
No live terminals provided. 
N/A 
 
c) Instructions for replacing lithium battery  
No lithium battery provided. 
N/A 
 
d) Class I earth connection warning  
Class II apparatus. 
N/A 
 
e) Instructions for multimedia system connection  
 
N/A 
 
f) Special stability warning for attachment of the 
apparatus to the floor/wall  
 N/A 
 
g) Warning: battery exposure to heat  
See remark 1). 
RTC battery in remote control 
unit. 
Pass 
 
h) Warning: protective film on CRT face  
Not CRT provided. 
N/A 
5.4.2 
a-b) Disconnect device: plug/coupler or all-pole 
mains switch location, accessibility and markings  
See remark 1). 
Pass 
 
c) Instructions for permanently connected equipment   
N/A 
 
Marking, signal lamps or similar for completely 
disconnection from the mains  
 N/A 
 
6 Hazardous 
radiation 
6.1 
Ionizing radiation < 36 pA/kg (0,5 mR/h)  
 
N/A 
 
Ionizing radiation under fault condition  
 
N/A 
6.2 
Laser radiation, emission limits to IEC 60825-1:2007
................................................................................... :
 N/A 
 
Emission limits under fault conditions  ..................... :  
N/A 
 
7 
Heating under normal operating conditions 
- 
7.1 
Temperature rises not exceeding specified values; 
fuse links and other protective devices defeated  
See appended table of CL.7.1.
Pass 
7.1.1 
Temperature rise of accessible parts  
See appended table of CL.7.1.
Pass 
7.1.2 
Temperature rise of parts providing electrical 
insulation  
See appended table of CL.7.1.
Pass 
7.1.3 
Temperature rise of parts acting as a support or as a 
mechanical barrier  
See appended table of CL.7.1.
Pass 
7.1.4 
Temperature rise of windings  
See appended table of CL.7.1.
Pass 
7.1.5 
Parts not subject to a limit under 7.1.1 to 7.1.4 
See appended table of CL.7.1.
Pass 
Page of 78
Display

Click on the first or last page to see other SB 200 (serv.man3) service manuals if exist.