Read JBL PULSE (serv.man6) EMC - CB Certificate online
- Page 4 of 9 -
www.nemko.com
Report No. 241619
2.9.2
First section of Clause 2.9.2 amended as
two sections:
Where required by 2.9.1, 2.10.8.3, 2.10.10
or 2.10.11, humidity conditioning is
conducted for 120 h in a cabinet or room
containing air with ambient temperature
40±2℃ and a relative humidity of
(93±3)%.During this conditioning the
component or subassembly is not
energized.
For equipment not to be operated at
tropical climatic conditions, Where required
by 2.9.1, 2.10.8.3, 2.10.10 or 2.10.11,
humidity conditioning is conducted for48 h
in a cabinet or room containing air with a
relative humidity of (93±3)%.
Thetemperature of the air, at all places
where samples can be located, is
maintained within 2 °Cof any convenient
value between 20 °C and 30 °C such that
condensation does not occur.
Due to pretreatment of equipment operated
at highaltitude area is humidity conditioning
withstand hot shock, specific requirements
are to be considered.
Add note: For equipment to be operated at
2000 m - 5000m above sea level,
assessment and requirement of humidity
conditioning for Insulation material
properties are considered.
two sections:
Where required by 2.9.1, 2.10.8.3, 2.10.10
or 2.10.11, humidity conditioning is
conducted for 120 h in a cabinet or room
containing air with ambient temperature
40±2℃ and a relative humidity of
(93±3)%.During this conditioning the
component or subassembly is not
energized.
For equipment not to be operated at
tropical climatic conditions, Where required
by 2.9.1, 2.10.8.3, 2.10.10 or 2.10.11,
humidity conditioning is conducted for48 h
in a cabinet or room containing air with a
relative humidity of (93±3)%.
Thetemperature of the air, at all places
where samples can be located, is
maintained within 2 °Cof any convenient
value between 20 °C and 30 °C such that
condensation does not occur.
Due to pretreatment of equipment operated
at highaltitude area is humidity conditioning
withstand hot shock, specific requirements
are to be considered.
Add note: For equipment to be operated at
2000 m - 5000m above sea level,
assessment and requirement of humidity
conditioning for Insulation material
properties are considered.
Class III
equipment
.
N/A
Click on the first or last page to see other PULSE (serv.man6) service manuals if exist.