Read Sony SLV-SE240B / SLV-SE240D / SLV-SE240G / SLV-SE240I / SLV-SE440K / SLV-SE640B / SLV-SE640D / SLV-SE640E / SLV-SE640N Service Manual online
1-12
53
Playing/searching at various speeds
Ad
ditio
ditio
nal Op
er
atio
atio
ns
Additional Operations
Playing/searching at various speeds
Before you start
…
• Refer to “Index to parts and controls” for button locations.
Playback options
To resume normal playback
Press H (play).
Using Playback Dial on the
VCR
VCR
With Playback Dial, you can
operate the following playback
options.
operate the following playback
options.
To
Do this
View the picture
during fast-forward or
rewind
during fast-forward or
rewind
During fast-forward, hold down M (fast-forward).
During rewind, hold down m (rewind).
During rewind, hold down m (rewind).
Play at high speed
• During playback, briefly press M (fast-forward) or
m (rewind). The tape continues to play at high
speed.
speed.
• During playback, hold down M (fast-forward) or
m (rewind). When you release the button, normal
playback resumes.
playback resumes.
Play at twice the
normal speed
normal speed
During playback, press ×2.
Play in slow motion
During playback, press y SLOW.
To
Do this
View the picture
during fast-forward or
rewind
during fast-forward or
rewind
During fast-forward, turn and hold Playback Dial to the
right (M (fast-forward)). During rewind, turn and hold
Playback Dial to the left (m (rewind)).
right (M (fast-forward)). During rewind, turn and hold
Playback Dial to the left (m (rewind)).
Play at high speed
• During playback, quickly turn and release Playback
Dial to the right ( M (fast-forward)) or left (m
(rewind)). The tape continues to play at high speed.
(rewind)). The tape continues to play at high speed.
• During playback, turn and hold Playback Dial to the
right (M (fast-forward)) or left (m (rewind)).
When you release Playback Dial, normal playback
resumes.
When you release Playback Dial, normal playback
resumes.
Playback Dial
continued
54
Playing/searching at various speeds
Tip
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
• Adjust the picture using the PROGRAM +/– buttons on the VCR if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• If the playback mode mark does not appear on the TV screen, press
DISPLAY.
• The picture may show noise when playing at high speed in reverse.
• Do not turn Playback Dial forcibly. It may damage Playback Dial.
• Do not turn Playback Dial forcibly. It may damage Playback Dial.
55
Setting the recording duration time
Ad
ditio
ditio
nal Op
er
atio
atio
ns
Setting the recording duration time
After you have started recording in the normal way, you can have the VCR stop
recording automatically after a specified duration.
recording automatically after a specified duration.
Before you start
…
• Refer to “Index to parts and controls” for button locations.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the
indicator disappears and the VCR
returns to the normal recording mode.
To stop recording
To stop the VCR while recording, press x (stop).
Note
• You cannot display the current tape time in the display window when setting the
recording duration time.
1
While recording, press z REC.
The
indicator appears in the display window.
2
Press z REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
In LP mode
Each press advances the time as shown below.
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
recording and turns off automatically.
0:30
1:00
4:00
4:30
Normal recording
0:30
1:00
8:00
9:00
Normal recording
56
Synchronized Recording (not available on SLV-SE240G/I)
Synchronized Recording
(not available on SLV-SE240G/I)
You can set the VCR to automatically record programmes from equipment
such as a satellite tuner by connecting the equipment to the LINE-2 (DEC/
such as a satellite tuner by connecting the equipment to the LINE-2 (DEC/
EXT)connector. The connected equipment must have a timer function for
this feature to work.
When the connected equipment turns on, the VCR also automatically turns
on and starts recording a programme from LINE-2 (DEC/EXT).
on and starts recording a programme from LINE-2 (DEC/EXT).
How to connect for Synchronized Recording
Connect the LINE-2 (DEC/EXT) connector of the VCR to the TV Scart
connector of the satellite tuner. Then connect the LINE-1 (EURO AV)
connector to the TV.
connector of the satellite tuner. Then connect the LINE-1 (EURO AV)
connector to the TV.
Scart cable (not supplied)
LINE-2 (DEC/EXT)
LINE-1 (EURO AV)
TV Scart
connector
connector
satellite tuner, etc.
Scart cable (not supplied)
Scart (EURO-AV)
: Signal flo
w
Click on the first or last page to see other SLV-SE240B / SLV-SE240D / SLV-SE240G / SLV-SE240I / SLV-SE440K / SLV-SE640B / SLV-SE640D / SLV-SE640E / SLV-SE640N service manuals if exist.