SLV-LX500, SLV-LX700S - Sony VCR Service Manual (repair manual). Page 13

Read Sony SLV-LX500 / SLV-LX700S Service Manual online

1-9
36
Locking the VCR (Child Lock)
Locking the VCR (Child Lock)
To lock the VCR
When the VCR is turned on, hold down 
?/1 POWER (alimentación) on the VCR 
until “LOC” appears in the display window.  The VCR turns off and the TIMER 
(temporizador) indicator remains lit if there is a timer setting.  The VCR will not 
work except for timer recordings.
To unlock the VCR
Hold down 
?/1 POWER (alimentación) on the VCR until “LOC” disappears from 
the display window.  The VCR is unlocked and turns on.
To stop timer recording while the VCR is locked, press 
x STOP (parada).  The 
recording stops and the VCR is unlocked.
Note
• The  VCR  will be unlocked when:
– You stop timer recording by pressing 
x STOP (parada).
– You  insert a tape.
– The AC power cord is disconnected or power supply stops.
After you have set the timer, you can lock all 
of the buttons on the VCR so that the settings 
are not canceled by mistake.
?/1 POWER (alimentación) 
x
STOP (parada)
37
Playing/searching at various speeds
Ad
di
tiona
l O
p
era
tions
Additional Operations
Playing/searching at various speeds
To resume normal playback
Press 
H PLAY (reproducción).
Playback options
Operation
View the picture during fast-
forward or rewind
During fast-forward, hold down 
M FF (avance rápido).  During 
rewind, hold down 
m REW (rebobinado).
Play at high speed
• During playback, briefly press 
M FF (avance rápido) or m REW 
(rebobinado).  The tape continues to play at high speed.
• During playback, hold down 
M FF (avance rápido) or m REW 
(rebobinado).  When you release the button, normal playback 
resumes.
Play at twice the normal speed
During playback, press ×2.
Play in slow motion
During playback or pause, press 
y SLOW (cámara lenta).
Play frame by frame
During pause, press 
M FF (avance rápido) on the remote commander.
FF (avance 
rápido)
SLOW (cámara 
lenta)
x2
REW 
(rebobinado)
PLAY 
(reproducción)
TRACKING (seguimiento) +/–
continued
38
Playing/searching at various speeds
Tip
• Adjust the picture using the TRACKING (seguimiento) +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes during pause.
• The VCR turns on and starts playback automatically by pressing 
H PLAY (reproducción) 
on the VCR with the VCR power turned off.
Notes
• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the 
picture quality cannot be guaranteed.
• The picture may show noise when playing at high speed in reverse.
39
Setting the recording duration time
Ad
di
tiona
l O
p
era
tions
Setting the recording duration time
To extend the duration
Press 
z REC (grabación) repeatedly to set a new duration time.
To cancel the duration
Press 
z REC (grabación) repeatedly until the TIMER (temporizador) indicator 
disappears and the VCR returns to normal recording mode.
To stop while recording
Press 
x STOP (parada).
Note
• You  cannot display the current tape time in the display window when setting the recording 
duration time.
After you have started recording, you can 
have the VCR stop recording automatically 
after a specified duration.
1
While recording, press 
z REC (grabación).
The TIMER (temporizador) indicator appears in the display window.
2
Press 
z REC (grabación) repeatedly to set the duration time.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR stops 
recording and turns off automatically.
REC 
(grabación)
0:30
1:00
3:30
4:00
Normal recording
Page of 44
Display

Click on the first or last page to see other SLV-LX500 / SLV-LX700S service manuals if exist.