SLV-ED22KR, SLV-ED22PL, SLV-ED22TW, SLV-ED55KR, SLV-ED55PL, SLV-ED88TW, SLV-ED99KR, SLV-ED99PL, SLV-ED99TW - Sony VCR Service Manual (repair manual). Page 9

Read Sony SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW Service Manual online

1-5
Basic Operations
20
Basic Operations
Playing a tape
Z EJECT
CLEAR
DISPLAY
H PLAY
M # FF
x STOP
m 3 REW
X PAUSE
1
Turn on your TV and set it to the video channel.
2
Insert a tape.
The VCR turns on and starts playing
automatically if you insert a tape with its
safety tab removed.
TRINITRON TV
SYNCHRO PLAY
x STOP
H PLAY
M # FF
m 3 REW
A EJECT
X PAUSE
1
2
3
4
5
6
7
8
9
0
21
Basic Operations
Basic Operations
3
Press 
H PLAY.
When the tape reaches the end, it will rewind automatically.
Additional tasks
To
Stop play
Pause play
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
Press
x STOP
X PAUSE
X PAUSE or H PLAY
M # FF during stop
m 3 REW during stop
Z EJECT
PLAY
OK
To use the time counter
At the point on the tape that you want to find later, press CLEAR. The
counter in the display window resets to “0:00:00.” Search for the point
afterwards by referring to the counter.
To display the counter on the TV screen, press DISPLAY.
Notes
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• While setting the menu on the TV screen, you cannot use the 
H PLAY, X PAUSE,
M # FF, m 3 REW, or x STOP buttons.
• The counter resets to “0:00:00” whenever a tape is reinserted.
• The counter stops counting when it comes to a portion with no recording.
EP
VIDEO
APC
continued
Basic Operations
22
Turning on the VCR and TV, and starting playback
automatically (Trinitron TV Synchro Play)
You can only use this function if your TV is made by Sony (Trinitron TV).
How to connect to use this function
Connect the VCR and TV with the audio/video cable (see “Audio/video
(A/V) hookup” on page 7 or 8.)  Be sure to connect the audio/video cable to
the VIDEO IN 1 jacks on the TV if the TV has two inputs or more.  The TV
must be placed where it will respond to the remote commander while you
are pointing it at the VCR.
Operation
Make sure that the TV’s main power is on.
Press TRINITRON TV SYNCHRO PLAY and hold the remote commander in
place for about two seconds.
The VCR and TV turn on, and the TV is set to VCR reception.  If there is a
tape in the VCR, playback starts automatically.
Notes
• If the Trinitron TV Synchro Play function does not work properly:
– Wait a few moments, and press the button again.
– Replace both of the batteries with new ones, and press the button again.
Note that this function may not operate some Sony TVs because of the remote
commander’s signal limitations.
• Do not press TRINITRON TV SYNCHRO PLAY while playing back a video tape.  If
you do so, the TV’s input source will momentarily switch to the TV’s tuner.
Playing a tape (continued)
23
Basic Operations
Basic Operations
Recording TV
programs
1
Turn on your TV and set it to the video channel.
2
Insert a tape with its safety tab in place.
z REC
x STOP
DISPLAY
INPUT SELECT
CH +/–
TV/VIDEO
SP/EP
1
2
3
4
5
6
7
8
9
0
continued
Page of 75
Display

Click on the first or last page to see other SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW service manuals if exist.