Read Sony SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW Service Manual online
1-2
Getting Started
8
Step 3: Hookup (continued)
Notes
• To listen to playback sounds in stereo, you must use the A/V connection.
• If you use the Trinitron TV Synchro Play function (see page 22), the A/V connection
• To listen to playback sounds in stereo, you must use the A/V connection.
• If you use the Trinitron TV Synchro Play function (see page 22), the A/V connection
is necessary. (If your TV has two or more inputs, connect the audio/video cable to
the VIDEO IN 1 jacks.)
the VIDEO IN 1 jacks.)
• You can improve sound quality by connecting a stereo system to LINE-2 OUT jacks
using audio cable (not supplied).
For SLV-ED55PL and ED22PL only
A Use this hookup if your TV has stereo jacks
B Use this hookup if your TV doesn’t have stereo jacks
VCR
Audio/video cable (not supplied)
TV
Note
• If you use the Trinitron TV Synchro Play function (see page 22), the A/V connection
• If you use the Trinitron TV Synchro Play function (see page 22), the A/V connection
is necessary. (If your TV has two or more inputs, connect the audio/video cable to
the VIDEO IN 1 jacks.)
the VIDEO IN 1 jacks.)
TV
VCR
Audio/video cable (not supplied)
IN
VIDEO
AUDIO
AUDIO VIDEO
LINE-1 IN
LINE-1 OUT
VIDEO
AUDIO
IN
AUDIO VIDEO
LINE-1 IN
LINE-1 OUT
9
Getting Started
Getting Started
Antenna hookup
Make the following connections when you’re using an antenna.
A Use this hookup if you’re using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
B Use this hookup if you’re using a VHF-only antenna (you get
channels 2–13 only)
or
or
Match the type of
connector on your
TV: A, B, or C.
connector on your
TV: A, B, or C.
A
B
C
UHF
VHF
A
or
or
Match the type of
connector on your
TV: A, B, or C.
connector on your
TV: A, B, or C.
B
For connector
types B and C, no
UHF connection is
required.
types B and C, no
UHF connection is
required.
C
UHF
VHF
VCR
UHF
VHF
UHF
VCR
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 52.
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 52.
VHF
IN
OUT
VHF/UHF
Rear of TV
VHF/UHF
Rear of TV
VHF/UHF
IN
OUT
VHF/UHF
continued
Getting Started
10
TV/VIDEO
?/1
Number
buttons,
ENTER
buttons,
ENTER
1
Set the RF UNIT switch on the rear of the VCR to CH3 or CH4,
whichever channel is not used in your area. If both are used, set the
switch to either channel.
whichever channel is not used in your area. If both are used, set the
switch to either channel.
2
Press
?/1 (power) to turn on the VCR.
3
Press TV/VIDEO on the remote commander to turn on the VIDEO
indicator in the VCR’s display window.
indicator in the VCR’s display window.
4
Press CH +/– to display a channel number in the display window.
Select an active channel number in your area.
Select an active channel number in your area.
5
Turn on your TV and set it to the channel you selected in step 1
(channel 3 or 4).
The channel you selected in step 4 appears on the TV screen. If the
channels change when you press CH +/–, you have made the
correct setting.
Whenever you use the VCR, set the TV to the channel selected in
step 1.
(channel 3 or 4).
The channel you selected in step 4 appears on the TV screen. If the
channels change when you press CH +/–, you have made the
correct setting.
Whenever you use the VCR, set the TV to the channel selected in
step 1.
Setting the RF unit
When connecting the VCR to the TV
using only the antenna cable, you must
set the RF UNIT switch on the rear of the
VCR so that the TV can receive the
correct signal from the VCR.
using only the antenna cable, you must
set the RF UNIT switch on the rear of the
VCR so that the TV can receive the
correct signal from the VCR.
If you made A/V connections (pages 7
or 8) you can skip this step.
or 8) you can skip this step.
CH +/–
• CH
• TV/
VIDEO
RF UNIT
CH3
RF UNIT
CH4
•
]/1
1
2
3
4
5
6
7
8
9
0
Step 3: Hookup (continued)
11
Getting Started
Getting Started
PLAY
OK
1
Press MENU, then press
M/m to move the
cursor (
B) to CLOCK SET, then press OK.
2
Press
M/m to set the month.
3
Press
, to flash the day and press M/m
to set the day.
The day of the week is set automatically.
The day of the week is set automatically.
Step 4
Setting the clock
You must set the time and date on the
VCR to be able to use the timer
recording features properly.
VCR to be able to use the timer
recording features properly.
Before you start...
• Turn on the VCR and the TV.
• Set the TV to the VCR channel
• Set the TV to the VCR channel
(channel 3 or 4). If your TV is
connected to the VCR using A/V
connections, set the TV to video input.
connected to the VCR using A/V
connections, set the TV to video input.
• Press TV/VIDEO to display the
VIDEO indicator in the VCR’s display
window.
window.
MENU
OK
M/m/</,
M/m/</,
MENU
PLAY
OK
CLOCK SET
1 1 / 2 0 0 0
SAT
12 : 0 0 AM
SET
SELECT
: [
]
END
: [ OK ]
: [
]
PLAY
OK
CLOCK SET
1 1 / 1 / 2 0 0 0
WED
12 : 0 0 AM
SET
SELECT
: [
]
END
: [ OK ]
: [
]
CLOCK SET
1 1 / 1
/ 2 0 0 0 THU
12 : 0 0 AM
6
SET
SELECT
: [
]
END
: [ OK ]
: [
]
continued
Click on the first or last page to see other SLV-ED22KR / SLV-ED22PL / SLV-ED22TW / SLV-ED55KR / SLV-ED55PL / SLV-ED88TW / SLV-ED99KR / SLV-ED99PL / SLV-ED99TW service manuals if exist.