JMECHA - Sony VCR Service Manual (repair manual). Page 26

— 26 —

1)

Remove the screw (M1.4 

×

 2) 1.

2)

Remove the gear cover B in the direction of the arrow A.

3)

Remove the GL drive gear.

1)

Coat the cam gear A and the GL drive gear with grease (1/2
drop).  (Refer to Fig. 2.)

2)

Refer to Fig. 1.   While adjusting phase of the GL drive gear as
shown, insert the GL drive gear into the GL drive shaft.  (Insert
it while moving the GL drive gear in the clockwise direction.)

3)

Insert the two claws of the gear cover B into the square holes
of mechanism chassis.

4)

Fix the GL drive shaft with the screw (M1.4 

×

 2) 1.  Be sure

that the gear cover B must not have any play.
Tightening torque: 0.059 ± 0.01 N•m (0.6 kg•cm)

  

1

×

3

A