JMECHA - Sony VCR Service Manual (repair manual). Page 14

— 14 —

1)

While pressing the claw of the LED retainer in the direction of
the arrow A, remove the LED retainer.

2)

Remove the LED portion 2 of the FP-102 flexible wiring
board.

3)

Remove the two screws (M1.4 

×

 1.4) 1.

4)

In order to remove the retainer plate assy, because it is hooked
with shaft A, shaft B and shaft C, remove the retainer plate
assy while moving it in the direction of the arrow B.

1)

Hook shaft A, shaft B and shaft C on notch A, notch B and
notch C of the retainer plate assy in this order.

2)

Attach the retainer plate assy with two screws (M1.4 

×

 1.4) 1.

Tightening torque: 0.059 ± 0.01 N•m (0.6 kg•cm)

3)

Route the FP-102 flexible wiring board as shown and install
the LED into the prism as shown.

4)

Hook the LED retainer on D, attach it to E and fix them.

2

2

1

×

A

B

D

E