Read Sony XBR-52HX905 Service Manual online
XBR-52HX905
24
SERVICE ADJUSTMENTS
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press
2
to move to the
002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
01: 2b-1
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis Model Name Data Value
Code
Name
AZ1-L
XBR-52HX905
08
2b-1
DIGITAL
SERVICE
002 MODEL
000 SEG
08: 2b-1
Data Value
Code Name
6. Proceed to “Selecting the Destination”.
Click on the first or last page to see other XBR-52HX905 service manuals if exist.