KV-XG29M30 (serv.man2) - Sony TV Service Manual (repair manual). Page 11

Read Sony KV-XG29M30 (serv.man2) Service Manual online

 11 
KV
-XG29M30/XG29M50/XG29M60/
KV
-XG29M80/XG29M81/XG29M90
RM-952
Using Your New TV
Using Y
our New TV
9
1
b
or
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
Presetting channels manually
1
Press SELECT until
“MANUAL PROGRAM”
appears.
2
Press + or –.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
5
Press SELECT.
Note
• If you preset a locked channel, that particular channel will be unlock
automatically (page 17).
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the ˘ (antenna)
terminal
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate
TV system until the picture or sound
quality is optimal.
B/G
I
D/K
M
VHF LOW B/G
TV SYS: B/G
continued
b
MANUAL PROGRAM
SELECT
SELECT
b
Using Your New TV
10
To change the color system setting
If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the 
… (video input) jack.
(1) Press SELECT until “COL SYS” appears.
(2) Press + or – to select the appropriate
color system until the color is
optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and 
¸
 +/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems:
incomplete Teletext display (KV-XG29M61 only), double images and lines moving
across the TV screen.
You can use the fine tuning function as below:
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press 
 to display “FINE” on the screen.
(5) Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6) Press SELECT to return to normal screen.
Presetting channels (continued)
COL SYS: AUTO
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
Page of 127
Display

Click on the first or last page to see other KV-XG29M30 (serv.man2) service manuals if exist.