KV-XG29M30 (serv.man2) - Sony TV Service Manual (repair manual)

kv-xg29m30 (serv.man2) service manual
Model
KV-XG29M30 (serv.man2)
Pages
127
Size
10.47 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kv-xg29m30-sm2.pdf
Date

Read Sony KV-XG29M30 (serv.man2) Service Manual online

CHASSIS
TRINITRON 
®
 
COLOR TV
SERVICE MANUAL
BG-3S
MODEL
COMMANDER DEST.
CHASSIS NO.
KV-XG29M30
RM-952
Australia SCC-U23D-A
KV-XG29M50
RM-952
GE
SCC-U12S-A
KV-XG29M50 
RM-952
Malaysia SCC-U21L-A
KV-XG29M50
RM-952
Thailand
SCC-U18R-A
KV-XG29M60
RM-952
Thailand SCC-U18S-A
KV-XG29M80
RM-952
ME
SCC-U30S-A
MODEL
COMMANDER DEST.
CHASSIS NO.
KV-XG29M81
RM-952
ME
SCC-U30R-A
KV-XG29M90
RM-952
Hong Kong SCC-U17N-A
– 2 –
KV-XG29M30/XG29M50/XG29M60/
KV-XG29M80/XG29M81/XG29M90
RM-952
SPECIFICATIONS
Note
Power requirements
110-220 V AC, 50/60 Hz
GE/ME Model
220-240 V AC, 50/60 Hz
Except GE/ME Model
Power consumption (W) Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Stereo/Bilingual system
NICAM Stereo/Bilingual B/G, I;
KV-XG29M30/XG29M60/
A2 Stereo/Bilingual (German) B/G
XG29M90 only
Teletext language
English, Arabic, French
KV-XG29M81 only
Channel coverage
B/G
VHF : E2 to E12
UHF : E21 to E69
CATV : S01 to S03, S1 to S41
VHF : 0 to 12, 5A, 9A
Australia only
UHF : 28 to 69
CATV : S01 to S03, S1 to S41
I
UHF : B21 to B68
CATV : S01 to S03, S1 to S41
D/K
VHF : C1 to C12, R1 to R12
UHF : C13 to C57, R21 to R60
CATV:  S01 to S03, S1 to S41, Z1 to Z39
M
VHF : A2 to A13
UHF : A14 to A79
CATV : A-8 to A-2, A to W+4, W+6 to W+84
˘
˘
˘
˘
˘ (Antenna)
75-ohm external terminal
Audio output
5W + 5W
Number of terminal
(Video)
Input: 2
Output: 1
Phono jacks; 1 V
P-P
, 75 ohms
Audio
Input: 2
Output: 1
Phono jacks; 500 mVrms
(Headphone)
Output: 1
Minijack
Picture tube
29 inch
Tube size (cm)
72
Measured diagonally
Screen size (cm)
68
Measured diagonally
Dimension (w/h/d, mm)
794 
× 573 × 517
Mass (kg)
48
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK 
! ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.
– 3 –
KV-XG29M30/XG29M50/XG29M60/
KV-XG29M80/XG29M81/XG29M90
RM-952
TABLE OF CONTENTS
Section
Title
Page
SELF DIAGNOSIS FUNCTION
................................
4
1. GENERAL
........................................................................
8
2. DISASSEMBLY
2-1.
Rear Cover Removal ................................................ 23
2-2.
Speaker Removal ..................................................... 23
2-3.
Chassis Assy Removal ............................................. 23
2-4.
Service Position ....................................................... 23
2-5.
Replacement of Parts ............................................... 24
2-5-1. Replacement of Control Button .....................................
24
2-5-2. Replacement of Light Guide ..........................................
24
2-6.
V1 Board Removal .................................................. 24
2-7.
D3 Board Removal .................................................. 24
2-8.
Terminal Bracket Removal ...................................... 25
2-9.
H2 Board Removal .................................................. 25
2-10. A and B6 Boards Removal ...................................... 25
2-11. Picture Tube Removal .............................................. 26
3. SET-UP ADJUSTMENTS
3-1.
Beam Landing .......................................................... 27
3-2.
Convergence ............................................................. 28
3-3.
Focus Adjustment .................................................... 30
3-4.
G2 (Screen) and White Balance Adjustments ......... 31
4. CIRCUIT ADJUSTMENT
4-1.
Adjustments with Commander ................................ 32
4-2.
Adjustment Method ................................................. 33
4-3.
Picture Quality Adjustments .................................... 38
4-4.
A Board Adjustment After IC003 (Memory)
Replacement ............................................................. 38
4-5.
Picture Distortion Adjustment ................................. 39
Section
Title
Page
5. DIAGRAMS
5-1.
Block Diagram ......................................................... 41
5-2.
Frame Schematic Diagram ...................................... 44
5-3
Circuit Boards Location .......................................... 47
5-4.
Schematic Diagrams and Printed Wiring Boards ... 48
(1)
Schematic Diagram of A (1/2) Board ...................... 51
(2)
Schematic Diagram of A (2/2) Board ...................... 55
(3)
Schematic Diagrams of C6 and VM1 Boards ............ 59
(4)
Schematic Diagrams of B6 and B2 Boards ............. 63
(5)
Schematic Diagrams of H2 and V1 Boards ............ 71
(6)
Schematic Diagram of D3 Board ............................ 75
5-5.
Semiconductors ........................................................ 77
6. EXPLODED VIEWS
6-1.
Speaker Bracket ....................................................... 80
6-2.
Chassis ..................................................................... 81
6-3.
Picture Tube ............................................................. 82
7. ELECTRICAL PARTS LIST
....................................... 83
– 4 –
KV-XG29M30/XG29M50/XG29M60/
KV-XG29M80/XG29M81/XG29M90
RM-952
The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER lamp will automatically
begin to flash.
The number of times the lamp flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER
lamp flash indicators is listed in the instruction manual for the user’s knowledge and reference. If an error symptom cannot
be reproduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past
problems and how often these problems occur.
1.
DIAGNOSTIC TEST  INDICATORS
When an errors occurs, the STANDBY/TIMER lamp will flash a set number of times to indicate the possible cause of the
problem. If there is more than one error, the lamp will identify the first of the problem areas.
Result for all of the following diagnostic items are displayed on screen. No error has occured if the screen displays a “0”.
Diagnostic
Item
Description
• Power does not
turn on
• +B overcurrent
(OCP) or
overvoltage
(OVP)
• Vertical deflection
stopped
• Horizontal
deflection
overdrive
• White balance
failure (no
PICTURE)
• Micro reset
Detected
Symptoms
• Power does not come on.
• No power is supplied to the
TV.
• AC power supply is faulty.
• Power does not come on.
• Load on power line is
shorted.
• Has entered standby state
after horizontal raster.
• Vertical deflection pulse is
stopped.
• Power line is shorted or
power supply is stopped.
• No raster is generated.
• CRT cathode current
detection reference pulse
output is small.
• Power is shut down shortly,
after this return back to
normal.
• Detect Micro latch up.
Note 1: If a + B overcurrent is detected, stoppage of the vertical deflection is detected simultaneously.
The symptom that is diagnosed first by the microcontroller is displayed on the screen.
Note 2: Refer to screen (G2) Adjustment in section 3-4 of this manual.
SELF DIAGNOSTIC FUNCTION
No. of times
STANDBY/TIMER
lamp flashes
Does not light
2 times
5 times
Self-diagnostic
display/Diagnostic
result
002:000 or
002:001~255
003:001~255
004:001~255
at the same time
005:000 or
005:001~225
101:00 or
101:001~225
Probable
Cause
Location
• Power cord is not plugged
in.
• Fuse is burned out F8601
(B6)
• H.OUT Q511 is shorted. (A
board)
• IC701 is shorted. (C6 board)
• -13V is not supplied. (A
board)
• IC 503 faulty (A board)
• G2 is improperly adjusted.
(Note 2)
• CRT problem.
• Video OUT IC701 is faulty.
(C6 board)
• IC301 is faulty. (A board)
• No connection A board to
C6 board.
• Discharge CRT (C6 Board)
• Static discharge
• External noise
Page of 127
Display

Download Sony KV-XG29M30 (serv.man2) Service Manual (Repair Manual)

Here you can read online and download Sony KV-XG29M30 (serv.man2) Service Manual in PDF. KV-XG29M30 (serv.man2) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony KV-XG29M30 (serv.man2) TV. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.