Read Sony KV-VF14M40 Service Manual online
–
21
–
29
Basic Operations
2
Press TAPE SPEED to select the tape speed, SP or LP.
EP cannot be selected when making timer recordings.
3
Press the number buttons
to enter the program’s G-
CODE number.
to enter the program’s G-
CODE number.
4
Press ENTER.
The date, start and stop
times, program position,
tape speed and sound
mode appears on the TV
screen.
times, program position,
tape speed and sound
mode appears on the TV
screen.
If you want to change the
sound mode, press A/B to
select MAIN or SUB.
sound mode, press A/B to
select MAIN or SUB.
5
Repeat steps 2 through 4
to enter other settings.
to enter other settings.
You can set up to five programs in a one month period using both
the G-CODE setting and the timer setting.
the G-CODE setting and the timer setting.
6
Press ENTER.
The TIMER REC indicator
on the front of the video
TV lights up and the video
TV enters timer recording
standby mode.
on the front of the video
TV lights up and the video
TV enters timer recording
standby mode.
To stop timer recording
Press ON/OFF.
If you make a mistake entering the G-CODE number
Press < and re-enter the correct number.
To use the video TV before timer recording starts
See page 31.
To check/add/change/cancel the timer settings
See page 32.
continued
1
6
7
0
9
4
3
2
5
8
G–CODE 27 SAT 20:00
G–CODE NO TAPE SPEED
[1 2 3 1 9 – – – –] [SP]
[1 2 3 1 9 – – – –] [SP]
Set 0–9
and press to enter
and press to enter
PLAY
ENTER
H
G–CODE 27 SAT 20:00
G–CODE NO TAPE SPEED
[1 2 3 1 9 – – – –] [SP]
[1 2 3 1 9 – – – –] [SP]
DATE START STOP PRG A/B
28 SUN 21:00 22:00 6SP MAIN
28 SUN 21:00 22:00 6SP MAIN
Set 0–9
and press to exit
and press to exit
PLAY
ENTER
H
26
Basic Operations
Recording TV programs (continued)
Recording TV programs using the timer
You can preset up to five programs within a one-month period.
Before you begin
• When the TV is in standby mode (the 1 indicator on the video TV
is lit in red), press ?/1 , PROGR +/– or a number button on the
remote control.
remote control.
• Make sure that the clock is set correctly. If it is not, see “Setting the
clock” on page 9.
• Make sure that the loaded cassette has its safety tab intact.
• Make sure that the video TV does not enter the timer recording
• Make sure that the video TV does not enter the timer recording
standby mode (the QUICK TIMER indicator on the video TV
should not be lit).
should not be lit).
Setting the timer
Example:
How to record a program
broadcast on program position 6 from
21:00 to 22:00 on Sunday, 28th
November 1999.
21:00 to 22:00 on Sunday, 28th
November 1999.
1
Press TIMER REC.
2
Press M or m to set the
date , then press ,.
date , then press ,.
A/B
G-CODE
COUNTER RESET
MENU
REW
EJECT
TIMER REC
ON/OFF
TAPE SPEED
INDEX
z
REC
X
PAUSE
x
STOP
m
FF
M
Z
.
>
PLAY
ENTER
PIC MODE
H
?
/1
TIMER REC
M/,/m/</ENTER
ON/OFF
PROGRAM LIST 27 SAT 20:00
DATE START STOP PRG
OK
SET
ENTER
SELECT
NEXT
CHANGE
CLEAR
27
SAT
SP
– –:– – – –:– – – –
PROGRAM LIST 27 SAT 20:00
DATE START STOP PRG
OK
SET
ENTER
SELECT
NEXT
CHANGE
CLEAR
28
SUN
SP
– –:– – – –:– – – –
TIMER REC
PLAY
ENTER
H
PLAY
ENTER
H
Click on the first or last page to see other KV-VF14M40 service manuals if exist.