KV-VF14M40 - Sony TV Service Manual (repair manual). Page 18

–

 18 

–

23

Basic Operations

Turn QUICK TIMER to set
the hour of the start time,
then press QUICK TIMER.

The hour is set and the
minute of the start time
turns red.

Turn QUICK TIMER to set the minute of the start time, then
press QUICK TIMER.

Use the QUICK TIMER dial to set the recording time period and
program position in the same way as in step 3.

Turn QUICK TIMER to move the cursor to OK, then press QUICK
TIMER.

The Quick Timer indicator lights up and the video TV enters the
timer recording standby mode.

continued

QUICK TIMER

PUSH

QUICK TIMER

PUSH

QUICK TIMER

PUSH

QUICK TIMER

PUSH

SELECT

START

OK

CHANGE

CLEAR

TAPE SPEED : SP

27

SAT

23:15

1

H

15

M

12

PROG

QUICK  TIMER     27 SAT   20:00

ENTER

24

Basic Operations

The QUICK TIMER button changes the following when turned clockwise
or counterclockwise
• When setting the start time:

The hour increases or decreases by one hour.
The minutes increase or decrease by one minute.

• The recording time period:

Increases or decreases by 15 minutes.

• The program position changes as follows:

1... y 8... y 12... y t1 y t2 y 0 y 1

If the QUICK TIMER button is pressed
• When the Quick Timer is not set:

The display for setting the Quick Timer appears.

• When the Quick Timer is set:

The display for checking the Quick Timer appears.

• When the clock is not set:

The CLOCK SET display appears.

Note
• When you turn QUICK TIMER to move the cursor to OK and then press

it, one of the following messages may appear depending on the cassette
used. If a message appears, the recording is canceled.
- Put in a tape.  The program recording is canceled.
- Put in a tape with safety tab.  The program recording is canceled.
- Tape ran out.  The program recording is canceled.
Insert a cassette for recording, rewind the tape and press QUICK TIMER
again.