Read Sony KV-J29MN1AK Service Manual online
– 6 –
KV
-J29MN1AK
-J29MN1AK
RM-883
Getting Started
6
MONITOR OUT
Rear of TV
to antenna
output
output
VCR
to video
and audio
inputs
and audio
inputs
or
: Signal flow
Audio system
MONITOR
OUT
VIDEO
L
(MONO)
AUDIO
R
VIDEO
IN
2
1
to antenna socket
Connecting audio/video equipment using MONITOR OUT jacks
CAUTION
Do not connect the power cord until you have completed making all other connections; otherwise a minimum
leakage current might flow through the antenna and other terminals to ground.
Do not connect the power cord until you have completed making all other connections; otherwise a minimum
leakage current might flow through the antenna and other terminals to ground.
Getting Started
7
Presetting channels
Presetting channels manually using the
buttons on the TV
buttons on the TV
1
Press MANUAL PROGR.
2
Press PROGR +/– on the remote commander
until the required program position
appears on the screen.
until the required program position
appears on the screen.
3
Press TV SYSTEM until your local TV system
appears.
appears.
4
Press VOLUME +/– until the required channel
picture appears on the screen.
picture appears on the screen.
5
Press MANUAL PROGR.
If the TV system is not properly selected
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
The color of the picture may be poor and/or the sound
may be noisy. In this case, select the appropriate TV
system.
1
Press PROGR +/– on the remote commander to
select the program position.
select the program position.
2
Press TV SYSTEM until the picture and sound
become normal.
become normal.
Notes
•
If you do not know your local TV system, consult your nearest
authorized service center or dealer.
authorized service center or dealer.
•
The setting of the TV SYSTEM is memorized for each program
position.
position.
Disabling program positions using the
buttons on the TV
buttons on the TV
By disabling unused or unwanted program positions,
you can skip those positions when you press
PROGR +/– on the remote commander.
you can skip those positions when you press
PROGR +/– on the remote commander.
1
Press PROGR +/– on the remote commander
until the unused or unwanted program
position appears on the screen.
until the unused or unwanted program
position appears on the screen.
2
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Preset the channel manually or automatically again.
You can preset up to 100 TV channels in numerical
sequence from program position 1 automatically.
sequence from program position 1 automatically.
To change the channel for a particular program
position or to receive a channel with a weak signal,
you can preset the channel manually. You can also
disable program position.
position or to receive a channel with a weak signal,
you can preset the channel manually. You can also
disable program position.
You can preset TV channels using the buttons on the
TV or the remote commander.
TV or the remote commander.
Presetting channels automatically
using the buttons on the TV
using the buttons on the TV
1
Press POWER to turn on the TV.
When the TV is turned on in standby mode, press
POWER on the remote commander.
POWER on the remote commander.
2
Press TV SYSTEM until your local TV system
appears.
appears.
3
Press AUTO PROGR.
To start presetting channels automatically
from the specified program position
1
from the specified program position
1
Press MANUAL PROGR.
2
Press TV SYSTEM to select your local TV system.
3
Press PROGR +/– to select the program position.
4
Press AUTO PROGR.
POWER
TV
SYSTEM
B/G
I
D/K
M
1
2
3
1
COLOR
SYSTEM
TV
SYSTEM
MANUAL
PROGR
SELECT
POWER
AUTO
PROGR
AUTO
PROGR
Click on the first or last page to see other KV-J29MN1AK service manuals if exist.