Read Sony KV-J14KD7 Service Manual online
– 7 –
KV
-J14KD7/J14KF7
-J14KD7/J14KF7
RM-883
Getting Started
-EN
8
Presetting channels manually using the
remote commander
remote commander
1
Press SELECT until “TV SYSTEM” appears.
2
Press + or – to select your local TV system.
3
Press PROGR +/– or a number button until
the required program appears on the
screen.
the required program appears on the
screen.
4
Press SELECT until “MANUAL PROGRAM”
appears.
appears.
5
Press + or – .
6
Press + or – .
The selected channel appears on the screen.
7
Press SELECT to return to normal screen.
+ or –
SELECT
POWER
SELECT
TV SYSTEM : B/G
SELECT
TV SYSTEM : B/G
B/G
D/K
1
2
3
1
SELECT
AUTO PROGRAM
VHF LOW B/G
Presetting channels automatically
using the remote commander
using the remote commander
1
Press POWER to turn on the TV.
When the TV is turned on in standby mode, press
POWER on the remote commander.
POWER on the remote commander.
2
Press SELECT until “TV SYSTEM” appears.
3
Press + or – to select your local TV system.
4
Press SELECT until “AUTO PROGRAM”
appears.
appears.
5
Press + or – .
6
Press + or – .
B/G
D/K
or
1
2
3
4
6
7
8
9
÷
0
5
PROGR
JUMP
SELECT
MANUAL PROGRAM
1
VHF LOW B/G
SELECT
Getting Started
9
-EN
If you are not satisfied with the picture
and sound quality
and sound quality
You may be able to further improve the picture and
sound quality by using fine tuning as below:
sound quality by using fine tuning as below:
1
Select the program position you want to
adjust.
adjust.
2
Press SELECT until “MANUAL PROGRAM”
appears on the screen.
appears on the screen.
3
Press + or – on the remote commander
once.
once.
4
Press DISP until “FINE” appears on the
screen.
screen.
5
Press + or – continuously until you are
satisfied with the picture and sound
quality.
satisfied with the picture and sound
quality.
6
Press SELECT to return to normal screen.
Disabling program positions using the
buttons on the TV
buttons on the TV
By disabling unused or unwanted program positions,
you can skip those positions when you press
PROGR +/– on the remote commander.
you can skip those positions when you press
PROGR +/– on the remote commander.
1
Press PROGR +/– on the remote commander
until the unused or unwanted program
position appears on the screen.
until the unused or unwanted program
position appears on the screen.
2
Press MANUAL PROGR.
3
Press PIC MODE on the remote commander.
4
Press MANUAL PROGR.
To cancel the skip setting
Preset the channel manually or automatically again.
Preset the channel manually or automatically again.
Click on the first or last page to see other KV-J14KD7 service manuals if exist.