Read Sony KV-HS29M90 (serv.man2) Service Manual online
– 14 –
KV-HS29M61/M90/M91, HS34M61/M90/M91, HS38M61/M90/M91
RM-997
•REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of
the picture tube and the anode cap to the metal chas-
sis, CRT shield or carbon paint on the CRT.
sis, CRT shield or carbon paint on the CRT.
•REMOVING PROCEDURES
1 Do not damage the surface of anode-caps with sharp
shaped objects.
2 Do not press the rubber too hard so as not to damage the
inside of anode-cap.
A metal fitting called the shatter-hook terminal is built
into the rubber.
A metal fitting called the shatter-hook terminal is built
into the rubber.
3 Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the
rubber.
rubber.
• HOW TO HANDLE AN ANODE-CAP
b
c
a
a
1 Tern up one side of the rubber cap in the direction indicated
by the arrow a.
by the arrow a.
2 Using a thumb pull the rubber cap firmly in the direction
indicatid by the arrow b.
indicatid by the arrow b.
3 When one side of the rubber cap is separated from the
anode button, the anode-cap can be removed by terning up
the rubber capand pulling it up in the directin off the arrow
c.
anode button, the anode-cap can be removed by terning up
the rubber capand pulling it up in the directin off the arrow
c.
Anode button
Click on the first or last page to see other KV-HS29M90 (serv.man2) service manuals if exist.