Read Sony KV-HG29M80 Service Manual online
– 7 –
KV-HG29M50,M60/L,M64K/L,M80,M86K/L,N60
RM-GA002
CAUTION:
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
1. Do not overpull the wire during dressing
_> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
hight-temperature parts.
Legend:
Hook
SECTION 2
WIRE DRESSING
2-1. Lead Assy, Jumper wire dressing at A board
(for non-PiP models)
2-2. Lead Assy, Jumper wire dressing at A board
(for HG PiP models)
2-3. Wire Dressing at A and H2 board (HG29 non-PiP models)
1) Insert and dress Conn Assy, 4P into hook.
2) Insert Conn Assy, 5P into CN4105.
Insert Conn Assy, 5P into hook.
Make sure AC Power Cord is behind Lead
Assy, Speaker at CN4106.
Insert Conn Assy, 5P into hook.
Make sure AC Power Cord is behind Lead
Assy, Speaker at CN4106.
W054
W077
W010
W083
C903
Dress wires far away from C514 and T501.
CN010
W065
Lead Assy, Earth
T501
C514
CN905
Keep wires close to
shield case and
away from R121.
Also keep it to the
right of CN9201.
shield case and
away from R121.
Also keep it to the
right of CN9201.
R121
Press wires down
towards board
towards board
W081
W082
Lead Assy, Jumper
CN9201
W082
W077
W010
W084
W065
For HG-non PiP
Dress Lead Assy, Jumper
P/N 1-910-026-28 &
1-923-512-11 around CN905,
C903 and below Conn Assy,
5P YUV.
P/N 1-910-026-28 &
1-923-512-11 around CN905,
C903 and below Conn Assy,
5P YUV.
CN905
P/N 1-923-512-11
C514
Dress both Lead Assy, Jumpers
along edge of shield case
along edge of shield case
Dress Lead Assy,
Jumper far away from
C514 and T501.
Jumper far away from
C514 and T501.
T501
Conn Assy, 4P
Conn Assy, 7P
Insert Conn Assy,
4P into hook
4P into hook
CN4113
CN3102
CN4110
CN2105
1
TVSR:
Connector assy must be kept away from
primary area (10mm minimum).
Connector assy must be kept away from
primary area (10mm minimum).
CN4105
CN4106
Lead Assy, Speaker
2
W016
P/N 1-910-026-28
Keep Lead Assy, Jumper
away from R121
away from R121
C903
P/N 1-923-512-11
W016
Dress wire W081-W082
around CN905, C903.
around CN905, C903.
AC Power Cord is behind
Lead Assy, Speaker
Lead Assy, Speaker
Conn Assy, 5P
Conn Assy, 5P YUV
Click on the first or last page to see other KV-HG29M80 service manuals if exist.