KV-DR34N93 - Sony TV Service Manual (repair manual). Page 9

– 9 –

$ Band, DGC(1) Removal (only top-side)

5 Anode Cap Removal

) Earth Coating Assy(2) Removal

7 Loosen the Neck Assembly 
 

fixing screw and remove

9 Loosen the Deflection Yoke
 

fixing screw and remove

6 C Board Removal

! Chassis Assy Removal

8 VM Board Removal

( Spring Tension(2) 
 Removal

# Supports, CRT(2) Removal

& DGC(2) Removal

% Holder, DGC(2) Removal

~ Nut special CRT (4)  

" Bracket Woofer(2) Removal

• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom

right and left.

• When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut

Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.

1) Place the TV set with the CRT face down on a cushion (jig).
2) Removal the Rear Cover.
3) Removal the 3D Box.
4) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.

5 One screw
    (3 

× 12)(+)(BVTP)

2 Three screws
    (3 

× 12)(+) BVTP

3 Four hooks

5 One screw
    (3 

× 12)(+)(BVTP)

1 Five connectors

6 Four hooks

7 D Board

4 A Board

3 Three hooks

1 Five hooks

4 Cover, H

2 H1 Board

5 H2 Board