KV-DR34N93 - Sony TV Service Manual (repair manual). Page 8

Read Sony KV-DR34N93 Service Manual online

– 8 –
KV-DR34N93
RM-992
1-9.
B3 AND D5 BOARDS REMOVAL
1-10. F1 BOARD REMOVAL
1-11 . BC1 BOARD REMOVAL
Note: Access to the B3 board is possible after removal
of the shiledcase. Remove the shiledcase by
removing 2 screws +BVTP 3x16
1-8.
TERMINAL BRACKET REMOVAL
2 Two screws
     (+BVTP 3 
× 12)
3 One screw
    (+BVTP 3 
× 12)
3 One screw
    (+BVTP 3 
× 12)
1 One screw
     (+BVTP 4 
× 16)
5 Terminal bracket
4 Two hooks
2 D5 Board
4 B3 Board
3 Two clips
1 Two clips
2 F1 Board
1 Two hooks
2 BC1 Board
4 V2 Board
(not used for this model)
6 P Board
     (not used for this model) 
1 One clip
3 Two clips
5 One clip
1-7.
SERVICE POSITION ON TV STAND
Note: 1) Remove the Rear Cover (refer 1-1)
- unscrew all 16 screws fixed on the Rear Cover. Hold
the top of the TV Cabinet; lift the Rear Cover slightly
upwards to release the Rear Cover foot from the TV
Stand and slide it backwards from the TV Cabinet.
2) Remove the 3D Speaker Box (refer 1-2)
3) Release the Lead Assy Speaker (left side)
4) Lift up the chassis and place it in the Service
Position as shown:-
Place the front of the main
bracket on to the foot of the
TV Cabinet
Use a non elastic and non
conductive string to tie the
main bracket to the woofer
bracket
Place the Terminal
Bracket edge into the hole
on the TV Stand foot
Caution: 1) In Service Position, make
sure all the TV connections
are connected correctly
before turning on the TV
set.
2) The TV on the TV Stand
without Rear Cover is
unstable. As such be
careful not to push the TV
foward or backward
Page of 127
Display

Click on the first or last page to see other KV-DR34N93 service manuals if exist.