Read Sony KV-DR29M31 Service Manual online
– 8 –
KV-DR29M31/DR29M61/DR29M80,/50
RM-991
" Band, DGC(1) Removal (only top-side) (x1)
4 Anode Cap Removal
not used for
these models
these models
& Earth Coating Assy Removal (x2)
6 Loosen the Neck Assembly
fixing screw and remove
8 Loosen the Deflection Yoke
fixing screw and remove
5 C Board Removal
9 Chassis Assy Removal
7 VM Board Removal
% Spring Tension
Removal (x2)
! Supports, CRT Removal (x2)
$ DGC Removal (x1)
# Holder, DGC Removal (x2)
) Nut special CRT (x4)
( Nut, Locking (x4)
1-12. PICTURE TUBE REMOVAL
Note:
• The picture tube is upside down for KV-DR29M31 (OCE) only and the position for the anode cap and tension springs
are changed accordingly.
• Please make sure the TV set is not in standing position before removing necessary CRT support located on bottom
right and left.
• When removing the Nut Locking: first make sure to hold the Nut special CRT with a spanner while opening the Nut
Locking using a torque driver. Then proceed to remove the Nut special CRT using a torque driver.
1) Place the TV set with the CRT face down on a cushion (jig).
2) Removal the Rear Cover.
3) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.
2) Removal the Rear Cover.
3) Unplug all interconnecting leads from the Deflection Yoke, Neck Assy, Degaussing Coils and CRT grounding strap.
Click on the first or last page to see other KV-DR29M31 service manuals if exist.