Read Sony KV-36XBR800 (serv.man2) Service Manual online
— 19 —
KV-36XBR800
5. Restore aging, HSIZ and HBLK to original condition.
Raster Edge Equal:
RASTER
EDGES
EDGES
RASTER
2-9. PICTURE DISTORTION ADJUSTMENTS
2-9.1. NTSC (DRC) FULL MODE
ADJUSTMENT
1. Face the picture tube in an east-west direction. (For best condition.)
2. Complete V-PIN and V-CEN adjustments fi rst (A2170-D1 06 V-PIN,
A2170-D1 05 V-CEN).
3. Input a monoscope and crosshatch signal. Adjust the picture
distortion with the following service parameters to balance the best
condition for these two signals.
condition for these two signals.
NOTE: Make sure that the picture size is within specs. Vertical size
is 11.8 ± 0.1 sq. and horizontal size is 15.8 ± 0.1 sq.
is 11.8 ± 0.1 sq. and horizontal size is 15.8 ± 0.1 sq.
4. Write data into memory before changing modes.
CXA2170D-1
Item 0. VPOS (V-POSITION)
Item 1. VSIZ (V-SIZE)
Item 3. VLIN (V-LINE)
Item 4. VSCO (VS-COR)
Item 9. HTPZ (H-TRAPEZOID)
CXA2170D-2
Item 1. HPOS (H-POSITION)
Item 2. HSIZ (H-SIZE)
Item 5. PIN (PIN AMP)
Item 7. UCP (UP COR PIN COR)
Item 8. LCP (LOW CO PIN COR)
Item 14. PPHA (PIN PHASE)
Item 15. VANG (AFC-ANGLE)
Item 16. LANG (L-ANGLE)
Item 17. VBOW (AFC-BOW)
Item 18. LBOW (L-BOW)
Click on the first or last page to see other KV-36XBR800 (serv.man2) service manuals if exist.