Read Sony KV-36XBR800 (serv.man2) Service Manual online
— 16 —
KV-36XBR800
2-5. SCREEN (G2)
1. Input composite white fi eld into Video 1.
2. Set to service mode and adjust as follows:
2-6. PICTURE QUALITY ADJUSTMENTS
Preparation:
• Set PRO MODE (Reset).
• Set PRO MODE (Reset).
1. Input signal (480i Composite):
• Color Bar Video 75 IRE (White) 75% modulation 7.5% Set-up.
• Color Bar RF 75 IRE (White) 75% modulation 7.5% Set-up.
2-6.1. VIDEO INPUT - SUB CONTRAST
ADJUSTMENT
Preparation:
• Input a Color Bar signal to VIDEO 1 (75 IRE 75%).
• Input a Color Bar signal to VIDEO 1 (75 IRE 75%).
• Set picture mode: Single (PRO MODE Reset).
• Picture:
Max
1. Set to Service Mode and adjust as follows:
NO. Name
Control Function
Avg. Data
01 RGBS
R ON
4
2150P-2
2. Connect oscilloscope to Pin 1 of CN9001 (R.DRV) on the C Board.
3. Adjust contrast according to the service mode item: SPIO.
NO. Name
Control Function
02 SCON
SUB-CONT
2103-2
white
black
GND
VR2
VR1
VR
(36XBR) = 1.67 ± 0.05 Vpp
4. Write data from Step 3 above, into memory.
2-6.2. VIDEO INPUT - SUB HUE/SUB COLOR
ADJUSTMENT
Preparation:
• Input a Color Bar signal to VIDEO 1 (75 IRE 75%).
• Input a Color Bar signal to VIDEO 1 (75 IRE 75%).
• Set picture mode: Single (PRO MODE Reset).
• Picture:
Max
1. Set to Service Mode and adjust as follows:
NO. Name
Control Function
Avg. Data
01 RGBS
R ON
7
2150P-2
2. Connect an oscilloscope to Pin 5 of CN9001 (B. DRV) on the C
Board.
3. Adjust color according to Service Mode for SCLO.
Click on the first or last page to see other KV-36XBR800 (serv.man2) service manuals if exist.