Read Sony KV-36FS12 Service Manual online
—
20 —
KV-36FS12/36FS16/36FV16/36FV26
5-1. SETTING THE SERVICE ADJUSTMENT
MODE
1. Standby mode (Power off).
2. Press
Display
Channel 5
Sound volume
Power
+
on the Remote Commander (Press each button within a
second).
second).
Service Adjustment Mode In
3. The CRT displays the item being adjusted.
4. Press or on the Remote Commander to select the item.
5. Press or on the Remote Commander to change the data.
6. Press
then
to write into memory.
Service Adjustment Mode Memory
Disp.
(Item)
(Item)
Item
data
data
SERVICE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
Green
Red
7. Press
then
on the Remote Commander to
initialize.
Disp.
(Item)
(Item)
Item
data
data
WRITE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
8. DO NOT turn off set until SERVICE appears.
SECTION 5
CIRCUIT ADJUSTMENTS
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y168, RM-Y169, RM-Y170, RM-Y171) to perform the circuit adjustments in this section.
NOTE: Test Equipment Required:
• Pattern generator
• Frequency counter
• Digital multimeter
• Audio oscillator
• Frequency counter
• Digital multimeter
• Audio oscillator
Carry out step 7 when adjusting
IDs 0 to 7 and when replacing
and adjusting IC002.
IDs 0 to 7 and when replacing
and adjusting IC002.
5-2. MEMORY WRITE CONFIRMATION
METHOD
1. After adjustment, pull out the plug from the AC outlet, then
replace the plug in the AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confirm they were adjusted.
5-3. ADJUST BUTTONS AND INDICATOR
Disp.
(Item)
(Item)
Item
data
data
SERVICE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
Mode
MUTING
POWER
DISPLAY
1
4
8
3
5
6
ENTER
VOLUME
RM-Y170
Click on the first or last page to see other KV-36FS12 service manuals if exist.