Read Sony KV-36FS12 Service Manual online
—
17
—
KV-36FS12/36FS16/36FV16/36FV26
TLH Plate Adjustment
•
Input crosshatch pattern.
•
Adjust PICTURE QUALITY to standard, PICTURE and
BRIGHTNESS to 50%, and OTHER to standard.
BRIGHTNESS to 50%, and OTHER to standard.
•
Adjust the Horizontal Convergence of red and blue dots
by tilting the TLH plate on the deflection yoke.
by tilting the TLH plate on the deflection yoke.
XCV
WA Board
RV1761
V.STAT
Y Magnet
1. Adjust XCV core to balance X axis.
2. Adjust YCH VR to balance Y axis.
3. Adjust vertical red and blue convergence with V.TILT (TLV
VR.)
Perform adjustments while tracking items 1 and 2.
4. Adjust Y MAGNET to correct V.BOW Geometery
Distortion.
5. Adjust H-TRP to correct H.Trapezoid Geometry Distor-
tion.
After adjusting items 4 and 5, confirm overall geometry again.
Dynamic Convergence Adjustment
Before starting, perform Vertical and Horizontal Static Conver-
gence Adjustment.
1. Slightly loosen deflection yoke screw.
2. Remove deflection yoke spacers.
3. Move the deflection yoke for best convergence as
shown below:
R G B
B G R
R
G
G
B
R
G
B
B G R R G B
R G B
R
R
R
G
B
G
B
G
B
R G B
B G R
4. Tighten the deflection yoke screw.
5. Install the deflection yoke spacers.
Screen-corner Convergence
1. Affix a permalloy assembly corresponding to the
misconverged areas:
b
a
c
d
a
b
a-d: screen-corner
misconvergence
c
d
Click on the first or last page to see other KV-36FS12 service manuals if exist.