KV-32LS65AUS - Sony TV Service Manual (repair manual). Page 7

If picture slants, please

adjust picture rotation

Not necessary

Adjust now

OK

OK

continued...

Do you want to start 

automatic tuning?

Yes

No

OK

OK

The first time you switch on your TV, a sequence of menu screens appear on the TV 
enabling you to: 1) adjust the picture slant, 2) search and store all available channels          
(TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on   
the screen.
However, if you need to change any of these settings at a later date, you can do that by 
selecting the appropriate option in the 

 (Set Up menu) or by pressing the Auto Start Up 

Button 

 on the TV set. 

Connect the TV plug to the mains socket (220-240V AC, 
50Hz)

Do not connect the power cord until you have 

completed making all other connections; otherwise a 
minimum leakage current might flow through the 
aerial and other terminals to ground.

The first time that the TV set is connected, it is usually 
turned on. If the TV is off, press the 

 on/off button on 

the TV set to turn on the TV.
The first time you switch on the TV, a menu screen 
displays automatically on the TV.

 

Because of the earth’s magnetism, the picture might slant. 
The Picture Rotation menu allows you to correct the 
picture slant if it is necessary.

  If it is not necessary, press

or

to select Not 

 and press OK.

If it is necessary, press

or

to select Adjust now, 

then press OK and correct any slant of the picture 
between –5 and +5 by pressing

or

. Finally press 

 to store.

The Auto Tuning menu appears on the screen. Press the

  OK button to select Yes.

The TV starts to automatically search and store all

  available broadcast channels for you. 

 This procedure could take some minutes. Please be

 

 patient and do not press any buttons, otherwise the

 

 automatic tuning will not be completed.

If no channels were found during the auto tuning 
process then a new menu appears automatically on 
the screen asking you to connect the aerial. Please 
connect the aerial (see page 6) and press OK. The 
auto tuning process will start again.

After all available channels are captured and stored,

 the 

 menu appears automatically

 

on the screen enabling you to change the order in

 

which the channels appear on the screen.

If you wish to keep the broadcast channels in the

 

tuned order, go to step 6.

If you wish to store the channels in a different order:

1 Press the

or

button to select the programme 

number with the channel (TV Broadcast) you wish

 

to rearrange, then press the

button. 

2 Press the

or

button to select the new

programme number position for your selected

 

channel (TV Broadcast), then press 

. 

3 Repeat steps b)1 and b)2 if you wish to change 

the order of the other channels.

Press the MENU button to remove the menu from the

 screen.

No channel found

Please connect aerial

Confirm

OK

  Programme:                   01

Auto Tuning

  Searching...

 Programme Sorting

Select channel:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   06     C58

OK

 Programme Sorting

Select new position:
Exit:    

MENU

  Programme:
   01     TVE
   02    TVE2
   03     TV3
   04     C33
   05     C27                   
   

06     C58

         05       C27

OK

OK

OK

OK

The operating instructions mentioned here are partial abstracts from the ‘Operating
Instruction Manual’. The page numbers of the ‘Operating Instruction Manual’ remain
as in the manual.