KV-32LS65AUS - Sony TV Service Manual (repair manual). Page 11

Read Sony KV-32LS65AUS Service Manual online

- 11 -
21
EN
Specifications
Additional Information

TV system: 
B 

Colour system:
PAL
SECAM, NTSC 3.58, 4.43 (only Video 
In)

Channel Coverage:
VHF: C00-C05, C05A, C06-C09, C09A,
C10-C12
UHF: C20-C69
CABLE: S02-S44

Picture Tube:
Flat Display FD Trinitron  WIDE:
32” (approx. 82 cm. measured 
diagonally)
Rear Terminals
1
/
1
21-pin Scart connector
 including 
audio/video
input, YUV input, TV 
audio/video output.
2
/
2
  21-pin Scart connector 
including audio / video 
input, YUV input, 
monitor audio/video 
output.
 
3
/
3
  21-pin Scart connector 
including audio / video 
input, S video input, 
selectable audio / video 
output.
audio outputs (Left/
Right) - phono jacks 
S
Design and specifications are subject to 
change without notice.
Ecological Paper - Totally Chlorine Free 
 
Side Terminals
4
S Video input – 4 pin DIN
4
   video input – phono jack
4
   audio input – phono jacks
         
headphones jack 
Sound Output:
2 x 20 W (music power)
2 x 10 W (RMS)

Power Consumption:
130 W

Standby Power Consumption:
0.3 W 

Dimensions (w x h x d) :
approx. 892 x 565 x 584 mm.

Weight:
approx. 62.2 Kg.

Accessories supplied:
1 Remote Control (RM-934)
2 Batteries (IEC designated)
1 Scart adaptor
2 Scart cables

Other features:
• 100 Hz picture, Digital Plus.
• Teletext, Fastext, TOPtext (250 page TEXT
 memory).
• Sleep Timer.
• Dolby Virtual.
• BBE.
• PIP.
• Auto Format.
S
 
22
Troubleshooting
Here are some simple solutions to problems which may affect the picture and sound.
Additional Information
If you continue to experience problems, have your TV serviced by qualified personnel.
 
Never open the casing yourself.
Problem
No picture (screen is dark) and no 
sound.
Poor or no picture (screen is dark), but 
good sound.
No picture or no menu information 
from equipment connected to the Scart 
connector.
Good picture, no sound.
No colour on colour programmes.
Distorted picture.
Distorted picture when changing 
programmes or selecting teletext.
Picture slanted.
Noisy picture when viewing a TV 
channel.
No unscrambling or unstable picture 
whilst viewing a scrambled channel 
with a decoder connected directly to 
the Scart connector 
3
/
3
.
Top bent picture when viewing a VCR
Remote control does not function.
The standby indicator  
 on the TV 
flashes.  
S
Solution
• Check the aerial connection.
• Plug the TV in and press the 
 button on the front of
 the TV. 
• If the standby indicator 
 is on, press TV 
 button on
  the remote control. 
• Using the menu system, select the “Picture 
Adjustment” menu and select “Reset” to return to the
 factory settings.
• Check that the optional equipment is on and press the
   
 button repeatedly on the remote control until the
  correct input symbol is displayed on the screen. 
• Press the 
 + button on the remote control. 
• Check that “TV Speakers” is “On” in the “Detail Set Up”
 menu.
• Check that headphones are not connected.
• Using the menu system, select the “Picture Adjustment”
menu and select “Reset” to return to factory settings.
• Check that you have not connected at the same time
equipment to the connectors 
A and B (see illustration on
page 18).
• Check that you have not connected at the same time
equipment to 
   and   (see illustration on page 18).
• Turn off any equipment connected to the Scart
  connector on the rear of the TV.
• Using the menu system, select the “Picture Rotation”
  option in the “Detail Set Up” menu to correct the
 picture slant.
• Using the menu system, select the “Manual 
Programme Preset” menu and adjust Fine Tuning
  (AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
  option in the “Detail Set Up” menu and select
  “Auto” to reduce the noise in the picture.
• Using the menu system, select the “Set Up” menu. Then 
enter to “Detail Set Up” option and set “AV3 Output” to 
“TV”.
• Connect VCR only by tuning to programme number “0” 
(see page 13) or via any “AV input” (see page 18).
• Check that the Media Selector on the remote control is set  
to the device you are using (VCR, TV or DVD).
• If the remote control does not operate the VCR or DVD 
even when the Media Selector has been set correctly. Enter 
the necessary code set as explained on “Remote Control 
Configuration for VCR/DVD” chapter of this instruction 
manual.
• Replace the batteries.
• Contact your nearest Sony service centre.
G2
G3
Display
Click on the first or last page to see other KV-32LS65AUS service manuals if exist.
Random: