Read Sony KV-32CS75B Service Manual online
- 14 -
To remove the G Board release the clips circled and remove
the screw from the middle of the board, then ease the
board gently away from the support bracket.
Removal of the D board follows the same procedure.
the screw from the middle of the board, then ease the
board gently away from the support bracket.
Removal of the D board follows the same procedure.
Clips
If the M Board needs to be removed for testing when the
chassis is placed in its service position, it would be necessary
to use an extender board and extension cable as indicated
above.
The Extender board and extension cable are available as a
service part by ordering the part number as indicated.
chassis is placed in its service position, it would be necessary
to use an extender board and extension cable as indicated
above.
The Extender board and extension cable are available as a
service part by ordering the part number as indicated.
2-6. Service Connector for M Board
To A
Board
Board
From M
Board
Board
Extender Board Assembly A-1642-293-A
2-7. Wire Dressing
Ensure that wires do not touch heatsinks and high temperature
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
hotspots. All wires must be kept at a minimum distance of
20mm away from the EHT lead
20mm
20mm
To remove the M Board gently release the two clips with a
screwdriver and remove the board from its socket vertically.
screwdriver and remove the board from its socket vertically.
2-4. G Board Removal
2-5. M Board Removal
Click on the first or last page to see other KV-32CS75B service manuals if exist.