KV-32CS75B - Sony TV Service Manual (repair manual). Page 11

Plug in your Hi-Fi equipment to the audio output sockets 

D if you wish to amplify the audio output from your

TV. Next, using the menu system, select the “Set Up” menu. Enter the “Detail Set Up” menu and set “TV
Speakers” to “Off”.

The audio level of the external speakers can be modified by pressing the volume buttons on the remote
control. Also, treble and bass settings can be modified through the “Sound Adjustment” menu.

Place the speakers of your equipment in front of your sitting position 
and besides the TV set, but keeping a distance of 50 cm from each 
speaker to the TV set.
Then, using the menu system, select the menu “Sound Adjustment”,
and select “Dolby Virtual” on the “Effect” option.

Connect your equipment to the designated TV socket, as indicated in the previous page.

Switch on the connected equipment.

To watch the picture from the connected equipment, press the 

 button repeatedly until the correct

input symbol appears on the screen.

Input Signals
• Audio / video input signal through the Scart connector 

E.

• RGB input signal through the Scart connector 

E. This symbol appears only if a RGB

source has been connected. 

• Audio / video input signal through the Scart connector 

F.

• RGB input signal through the Scart connector 

F. This symbol appears only if a RGB

source has been connected. 

• Audio/video input signal through the Scart connector 

G.

• S Video Input signal through the Scart connector 

G. This symbol appears only if a S

Video source has been connected. 

• Video input signal through the phono socket 

B and Audio input signal through phono

socket 

C.

• S Video Input signal through the front S Video input jack 

A and Audio signal through

phono socket 

C. This symbol appears only if a S Video source has been connected. 

Press 

 button on the remote control to return to the normal TV picture. 

For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select 

4 or 

4 input signal using

the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual
Sound” “A” on the sound menu screen.

S

S

S

~50°

Left Hi-Fi
speaker

Right Hi-Fi
speaker

Your sitting position

Depending on your country selection B/G/H, D/K, L , I

PAL, SECAM
NTSC 3.58, 4.43 (Video In only)

VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER:

S21-S41

D/K:

R1-R12, R21-R69

Flat display FD Trinitron WIDE32” (approx. 82 cm measured diagonally)

1/

21-pin Scart connector (CENELEC standard) including audio/
video input, RGB input, TV audio/video output

2/

21-pin Scart connector (CENELEC standard) including audio/
video input, RGB input, monitor audio/video output

3/

21-pin Scart connector (CENELEC standard) including audio/

video input, S-video input, selectable audio/video output and
Smartlink interface
Audio outputs (Left/Right) - phono jacks

S Video input - 4 pin DIN

Video input - phono jack

Audio input - phono jacks

i

Headphones jack

2 x 20W (Music Power), 2 x 10W (RMS)
Woofer:  30W (Music Power), 15W (RMS)

102W

0.4W

Approx. 933mm x 562mm x 572mm

Approx. 60Kg

1 Remote Control (RM-944), 2 batteries (IEC designated)

• 100Hz picture
• Teletext, Fastext, TOPtext (250 page TEXT memory)
• Sleep Timer
• Smartlink (direct link between your TV set and a compatible VCR. For more

information on Smartlink, please refer to the Instruction Manual of your VCR)

• TV system Autodetection
• Dolby Virtual
• BBE
• PIP
• Autoformat

S

S