KV-29XL70E - Sony TV Service Manual (repair manual). Page 9

Manually fine tune the TV to obtain a better
picture reception if the  picture is distorted.
Normally the automatic fine tuning (AFT) is in
operation, but you can alter it manually.

To do this: 

Whilst watching the channel (TV Broadcast) you
wish to fine tune, select the AFT option and press

b button. Next press the v or

 

V buttons to adjust

the fine tuning between -15 and +15. Finally
press the OK button twice to store.

Skip any unwanted programme numbers when
they are selected with the PROG +/- buttons.

To do this: 

After highlighting the Programme  option, press
the  PROG +/- button to select the programme
number you want to skip. When the programme
you want to skip appears on the screen, select
the  Skip option and press the 

b button. Next

press the 

v  or

 

V  buttons to select Yes. Finally

press the OK button twice to confirm and store.

To cancel this function afterwards, select “No”
instead of “Yes” in the step above.

View and record scrambled channels when using
a decoder connected directly to the Scart socket

3/

3  or through a VCR.

The availability of this option depends on

the country you have selected in the
“Language/Country” menu.

To do this: 

Select the Decoder option and press the 

b

button. Next press the 

v or

 

V buttons to select

On. Finally press the OK button twice to confirm
and store.

To cancel this function afterwards, select “Off”
instead of “On” in the step above.

The “Noise Reduction” option in the “Detail Set Up”
menu allows you to automatically reduce any picture
noise visible in the broadcast signal.

To do this: 
After selecting the option, press the 

b button. Then

press the 

v or

 

V buttons to select Auto. Finally press

the OK button to confirm and store.

To cancel this function later on, select “Off” instead of
“Auto” in the step above.

S

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Detail Set Up

  Noise Reduction:         
  AV3 Output:
  TV Speakers:  
  RGB Centring:            
  Picture Rotation:
  PIP Input:

   AV1

  PIP Position:          

Auto
TV
On
0
0

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

continued...

The “AV3 Output” option in the “Detail Set Up” menu
allows you to select the source to be output from the
Scart connector 

3/

3 so you can record from

this Scart any signal coming from the TV or from
external equipment connected to Scart connectors

1/

1 or 

2/

2 or the front connectors

4 or 

4 and 

4.

If your VCR supports Smartlink, this procedure
is not necessary.

To do this: 
After selecting the option, press the 

b button. Then

press the 

v or

 

V buttons to select the desired output

signal: TV, AV1, AV2, AV4, YC4 or AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.

If you have connected a decoder to the Scart socket 

3/

3 or to a VCR connected to that Scart

socket, please remember to set the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.

The “TV Speakers” option in the “Detail Set Up”
menu allows you to mute the TV speakers in order to
listen to the TV from an external amplifier connected
to the audio outputs on the rear of the TV set.

To do this: 
After selecting the option, press the 

b button. Then

press the 

v or

 

V buttons to select Off. Finally press

the OK button to confirm and store. 

To cancel this function later on, select “On” instead of
“Off” in the step above.

When connecting an RGB source, such as a
“PlayStation”, you may need to readjust the
horizontal position of the picture. In that case, you
can readjust it using the “RGB Centring” option in the
“Detail Set Up”.

To do this: 
While watching an RGB source select the “RGB
Centring” option and press the 

b button. Then press

the 

v or

 

V buttons to adjust the centre of the picture

between –10 and +10. Finally press the OK button to
confirm and store. 

S

S

 

S

Detail Set Up

  Noise Reduction:         
  AV3 Output:
  TV Speakers:   
  RGB Centring:            
  Picture Rotation:
  PIP Input:

   AV1

  PIP Position:          
         

Auto
TV
On
0
0

OK

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Detail Set Up

  Noise Reduction:         
  AV3 Output:
  TV Speakers:   
  RGB Centring:            
  Picture Rotation:
  PIP Input:

   AV1

  PIP Position:          
         

Auto
TV
On
0
0

OK

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Picture Adjustment

  Mode:  Personal
   Contrast
   Brightness
   Colour
   Sharpness
   Hue
   Reset

OK

Set Up

  Language/Country
  Auto Tuning
  Programme Sorting
  Progamme Labels
  AV Preset
  Manual Programme Preset
  Detail Set Up

OK

Detail Set Up

  Noise Reduction:         
  AV3 Output:
  TV Speakers:   
  RGB Centring:            
  Picture Rotation:
  PIP Input:

   AV1

  PIP Position:          
         

Auto
TV
On
0
0

OK

continued...