KV-29XL70E - Sony TV Service Manual (repair manual). Page 11

Using the following instructions you can connect a wide range of optional equipment to your TV set.
(Connecting cables are not supplied).

4

4

o4

4

4

o4

B

C

A

S VHS/Hi8/
DVC
camcorder

8mm/Hi8/
DVC

camcorder

When you connect the headphones, 
the TV speakers will automatically be 
muted.

• To avoid picture distortion, do not connect external equipment to connectors 

A and B at the same

time.

• Do not connect a Decoder to the Scart connector 

F.

To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual. We
recommend you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test
signal to the TV programme number “0” by using the “Manual Programme Preset” option. (for details of how
to manually programme these presets, see page 13, step a).
Refer to your VCR instruction manual to find out the output channel of your VCR.

Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please
refer to the instruction manual of your VCR.
If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart
socket 

3/

3 

G.

 

G or through a VCR connected to

Select the “Manual Programme Preset” option in the “Set Up” menu and after selecting the “Decoder

” option,

select “On” (by using

 

the 

v or V button). Repeat this procedure for each scrambled signal.

 The availability of this option depends on the country you have selected in the “Language/Country” menu.

S

S

 “PlayStation” is a product of Sony 

Computer Entertainment, Inc.

 “PlayStation” is a trademark of Sony 

Computer Entertainment, Inc.

F

G

Decoder

“PlayStation”

DVD

D

Hi-Fi

Decoder

VCR

E

continued...

Plug in your Hi-Fi equipment to the audio output sockets 

D if you wish to amplify the audio output from your

TV. Next, using the menu system, select the “Set Up” menu. Enter the “Detail Set Up” menu and set “TV
Speakers” to “Off”.

The audio level of the external speakers can be modified by pressing the volume buttons on the remote
control. Also, treble and bass settings can be modified through the “Sound Adjustment” menu.

Place the speakers of your equipment in front of your sitting position 
and besides the TV set, but keeping a distance of 50 cm from each 
speaker to the TV set.
Then, using the menu system, select the menu “Sound Adjustment”, 
and select “Dolby Virtual” on the “Effect” option.

Connect your equipment to the designated TV socket, as indicated in the previous page.

Switch on the connected equipment.

To watch the picture from the connected equipment, press the 

 button repeatedly until the correct

input symbol appears on the screen.

Input Signals
• Audio / video input signal through the Scart connector 

E.

• RGB input signal through the Scart connector 

E. This symbol appears only if a RGB

source has been connected. 

• Audio / video input signal through the Scart connector 

F. 

• RGB input signal through the Scart connector 

F. This symbol appears only if a RGB

source has been connected. 

• Audio/video input signal through the Scart connector 

G. 

• S Video Input signal through the Scart connector 

G. This symbol appears only if a S

Video source has been connected. 

• Video input signal through the phono socket 

B and Audio input signal through phono

socket 

C. 

• S Video Input signal through the front S Video input jack 

A and Audio signal through

phono socket 

C. This symbol appears only if a S Video source has been connected. 

Press 

 button on the remote control to return to the normal TV picture. 

For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 

4 or 

4 input signal

using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual
Sound” “A” on the sound menu screen.

S

S

S

~50°

Left Hi-Fi
speaker

Right Hi-Fi
speaker

Your sitting position