Read Sony KV-29CL11B Service Manual online
- 9 -
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broasdcast
signal.
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broasdcast
signal.
To do this: after selecting the option, press
.
Then press
or
to select Auto. Finally
press OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
instead of “Auto” in the step above.
AV2 OUTPUT
The “AV2 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector
The “AV2 Output” option in the “Detail Set
Up” menu allows you to select the source to be
output from the Scart connector
:2/q
in
order you can record from this Scart any signal
coming from the TV or from external
equipment connected to the Scart connector
coming from the TV or from external
equipment connected to the Scart connector
:1/
or front connectors
3 and
3.
If your VCR supports SmartLink, this
procedure is not necessary.
procedure is not necessary.
To do this: after selecting the option, press
.
Then press
or
to select the desired
output signal: TV, AV1, AV3 or AUTO.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
Scart
:2/q
or to a VCR connected to
this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
Level 1
Level 2
Level 3 / Function
continued...
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
AV2 Output:
RGB Centring:
Picture Rotation:
Auto
TV
0
0
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring:
Picture Rotation:
AV2 Output:
RGB Centring:
Picture Rotation:
Auto
TV
0
0
TV
0
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
MANUAL PROGRAMME PRESET
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
The “Manual Programme Preset” option in the
“Set Up” menu allows you to:
a)
Preset channels or a video input source one by one to the programme order of your choice.
To do this:
1 After selecting the ”Manual Programme Preset” option, press
To do this:
1 After selecting the ”Manual Programme Preset” option, press
then with Programme
option highlighted press
. Press
or
to select on which programme number you
want to preset the channel (for VCR, select programme number “0”). Then press
.
2
The following option is only available depending on the country you have selected
in the “Language/Country” menu.
in the “Language/Country” menu.
After selecting the System option, press
. Then press
or
to select the TV
Broadcast system (B/G for western European countries or D/K for eastern European
countries). Then press
countries). Then press
.
3 After selecting the Channel option, press
. Then press
or
to select the channel
tuning (“C” for terrestrial channels or “S” for cable channels). Next press
. After that,
press the number buttons to enter directly the channel number of the TV Broadcast or the
channel of the VCR signal. If you do not know the channel number, press
channel of the VCR signal. If you do not know the channel number, press
or
to
search for it. When you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
programme number with the channel you wish to name. When the programme you want to
name appears on the screen, select the Label option and press
. Next press
o
r
to
select a letter, number or “-“ for a blank. Press
to confirm this character. Select the other
four characters in the same way. After selecting all the characters, press OK twice to store.
c)
Normally the automatic fine tuning (AFT) is operating, however you can manually fine tune
the TV to obtain a better picture reception in the case that the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
the TV to obtain a better picture reception in the case that the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT
option and press
. Next press
or
to adjust the fine tuning between -15 and +15.
Finally press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROGR +/-
buttons.
To do this: Highlighting the Programme option, press the PROGR +/- button to select the
programme number you want to skip. When the programme you want to skip appears on
the screen, select the Skip option and press
programme number you want to skip. When the programme you want to skip appears on
the screen, select the Skip option and press
. Next press
or
to select Yes. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e)
View and record correctly scrambled channels when using a decoder connected directly to
the Scart
:
2/
or through a VCR.
This option is only available depending on the country you have selected in the “Language/
Country” menu.
To do this: select the Decoder option and press
Country” menu.
To do this: select the Decoder option and press
. Next press
or
to select On. Finally
press OK twice to confirm and store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
S
Level 1
Level 2
Level 3 / Function
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Click on the first or last page to see other KV-29CL11B service manuals if exist.