KV-29CL11B - Sony TV Service Manual (repair manual). Page 12

TV system: 
Depending on your country selection: 
B/G/H, D/K, L, I

Colour system:
PAL, SECAM 
NTSC 3.58, 4.43 (only Video In)

Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, R21-R69
L:F2-F10, B-Q, F21-F69
I:UHF B21-B69

Picture Tube:
Flat Display FD Trinitron 
28” (approx. 71 cm. measured diagonally)
29” (approx. 72 cm. measured diagonally)

1/

21-pin scart connector (CENELEC standard)
 including audio/video input, RGB input, TV 
audio/video output.

2/

 

(SMARTLINK)  

21-pin scart connector (CENELEC standard) 
including audio/video input, S video input, 
selectable audio/video output and SmartLink 
interface.

3  video input – phono jack
3  audio input – phono jacks
headphones jack 

S

 

Sound Output:
2 x 10 W (music power)
2 x 5 W (RMS)

Power Consumption:
28”  :  90 W
29”  :  94 W
Standby Power Consumption:
0.5 W 

Dimensions (w x h x d) :
28”  :  Approx. 788 x 517 x 523 mm
29”  :  Approx. 788 x 598 x 523 mm.

Weight:
28”  :  Approx. 41.5 Kg
29”  :  Approx. 45.8 Kg

Accessories supplied:
1 remote control (RM-947)
2 x IEC designated AA size batteries 

Other features:
•Teletext, Fastext, TOPtext.
•Sleep Timer.
•SmartLink (direct link between your TV set and 
a compatible VCR. For more information on 
SmartLink, please refer to your VCR instruction 
manual).
•TV system autodetection.

  Here are some simple solutions to the problems which may affect the picture and sound.

No picture (screen is dark) and no 
sound.

Poor or no picture (screen is dark), 
but good sound.

No picture or no menu information 
from equipment connected to the 
Scart connector.

Good picture, no sound.

No colour on colour programmes.

Distorted picture when changing 
programmes or selecting teletext.

Wrong characters appear when 
viewing teletext.

Picture slanted

Noisy picture when viewing a TV 
channel.

No unscrambled picture whilst 
viewing un unscrambled channel 
with a decoder connected through 
the Scart connector 

:2/q

.

Remote control does not function.

The standby indicator 

 on the TV 

flashes.  

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of

  the TV. 
• If the standby indicator 

 is on, press 

 button on

  the remote control. 

• Using the menu system, select the “Picture 

Adjustment” menu and select “Reset” to return to the

  factory settings (see page 10).

• Check that the optional equipment is on and press the
   

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen (see 

page 19).

• Press the 

 + button on the remote control. 

• Check that “TV Speakers” is “On” on the “Sound 

Adjustment” menu (see page 11).

• 

Check that headphones are not connected.

• Using the menu system, select the “Picture 

Adjustment” menu and select “Reset” to return to 
factory settings (see page 10).

• Turn off any equipment connected to the Scart
  connector on the rear of the TV.

• Using the menu system, enter to the “Language/

Country” (see page 12) menu and select the country in 
which you operate the TV set. For Cyrillic languages, 
we recommend selecting Russia country if your own 
country does not appear in the list.  

• Using the menu system, select the “Picture Rotation”
  option in the “Detail Set Up” menu to correct the
  picture slant (see page 16).

• Using the menu system, select the “Manual 

Programme Preset” menu and adjust Fine Tuning

  (AFT) to obtain better picture reception (see page 14).
• Using the menu system, select the “Noise Reduction”
  option in the “Detail Set Up” menu and select
  “Auto” to reduce the noise in the picture (see page 15).

• Using the menu system, select the “Set Up” menu. 

Then enter to “Detail Set Up” option and set “AV2 
Output” to “TV” (see page 15).

• Replace the batteries.

• Contact your nearest Sony service centre.