Read Sony KV-28FQ70B Service Manual online
- 14 -
2-6. D2 Board Removal
To remove the D2 board remove the two screws circled,
release the clips circled and ease the board gently away from
the support bracket.
release the clips circled and ease the board gently away from
the support bracket.
Screws
Clips
2-7. D Board Removal
To remove the D board first remove the D2 bracket by
removing the two screws (one on each side of the bracket)
and releasing the four clips (two on each side of the bracket).
The D board can then be removed using the same method as
the G board.
removing the two screws (one on each side of the bracket)
and releasing the four clips (two on each side of the bracket).
The D board can then be removed using the same method as
the G board.
Screw
Clips
To remove the G Board release the clips circled and ease the
board gently away from the support bracket.
board gently away from the support bracket.
Clips
2-4. Service Position
2-5. G Board Removal
To place the chassis in the service position, insert the main
bracket firmly into the T-slot located on the left corner of the
beznet as indicated (see inset). To gain access to the underside
of the boards follow the instructions on page 17. [Removal
and Replacement of the main bracket bottom plates].
bracket firmly into the T-slot located on the left corner of the
beznet as indicated (see inset). To gain access to the underside
of the boards follow the instructions on page 17. [Removal
and Replacement of the main bracket bottom plates].
Click on the first or last page to see other KV-28FQ70B service manuals if exist.