KV-28DS60U - Sony TV Service Manual (repair manual). Page 9

9

Press the MENU button on the remote control to display
the menu on the TV screen.

Move the OK button on the remote control DOWN to
select the 

 symbol on the menu screen then move

RIGHT to enter the `PRESET' menu.

Move the OK button DOWN to select “Programme
Setup” then move RIGHT to enter the `PROGRAMME
SETUP' menu.

Move the OK button RIGHT to highlight the brackets
then move repeatedly DOWN to select `Digital' if you
wish to view digital channels or `Analogue' if you wish
to view analogue channels.

Press the OK button to confirm then move LEFT to
display the PRESET menu.

Move the OK button UP to select `Auto
Programme' then move the OK button RIGHT to display
the “AUTO PROGRAMME” menu.

Press the OK button to start the automatic tuning
process.  The word `searching' now flashes on the menu
screen and the TV starts to store all available channels.
As the TV is searching, the bottom right corner of the
menu screen displays its progress.  Please be patient and
do not press any buttons.

When the autotune procedure is complete, the PRESET
menu appears on the screen and the channel currently
being broadcast on programme 1 is displayed.

Press the MENU button to remove the `PRESET' menu
from the TV screen.   You can now view the channels by
pressing the PROGR+/- or the numbered buttons on the
remote control.

• If you wish to stop the “Autotune” procedure,

press the OK button then the MENU button on
the remote control.

• If, after tuning is complete, no digital

programme is displayed on the TV, repeat steps
1-9 but select `Analogue' in the Programme
Setup menu screen.  When digital programmes
become available in your area, repeat steps 1-9
above and select `Digital' in the Programme
Setup menu screen.

You need to tune the TV to receive channels. By following the instructions below, this TV will
automatically search and store all available channels for you.  If at any time when using this
menu you want to return to the normal TV picture, press the MENU button.

CONTROL

+

–

PROGR

–

+

Programme Up (+) or Down
(-) buttons.  After pressing
the CONTROL button on the
top of the TV set, press to
select TV channels.

Volume control buttons. After
pressing the CONTROL button
on the top of the TV set, press to
increase (+)/decrease (-) volume.

Video input button.
After pressing the
CONTROL button
on the top of the TV
set, press to select
the input signals
from VCR etc.

On/Off Switch.
Press to switch TV
on/off.

CONTROL button.
Press to activate
and illuminate the
control panel.

The operating instructions mentioned here are partial abstracts
from the Operating Manual. The page numbers of the Operating

Instruction Manual remain as in the manual.