Read Sony KV-14LM1B Service Manual online
12
SECTION 2
DISASSEMBLY
2-3. A Board PWB Removal [ Step 2 ]
2-2. A Board PWB Removal [ Step 1 ]
2-5. Wire Dressing
Ensure that all wires do not touch heat-sinks and high
temperature hot spots. All wires must be kept at a minimum
distance of 20mm away from the EHT lead.
temperature hot spots. All wires must be kept at a minimum
distance of 20mm away from the EHT lead.
2-1. Rear Cover Removal
2-4. Service Position
Release the mains power cable from its securing posts.
Remove the rear cover fixing screws indicated. Pull the rear
cover away from the front beznet until clear of chassis.
Remove the rear cover fixing screws indicated. Pull the rear
cover away from the front beznet until clear of chassis.
Note : Use a cross-head screwdriver with a blade length of at
least 200mm.
Remove screw.
<=
Remove FBT
support bracket.
support bracket.
<=
Release the 2 securing
clips located at either
side of the chassis and
slide the PWB clear of
the bracket.
clips located at either
side of the chassis and
slide the PWB clear of
the bracket.
<=
Place the A Board PWB in the
position indicated to carry out
servicing.
position indicated to carry out
servicing.
=>
=>
<=
<=
Click on the first or last page to see other KV-14LM1B service manuals if exist.