KV-14LM1B - Sony TV Service Manual (repair manual). Page 11

11

TV system: 
B/G/H, D/K

Colour system:
PAL, SECAM 
NTSC 3.58, 4.43 (only Video In)

Channel Coverage:
VHF: E2-E12
UHF: E21-E69
CATV: S1-S20
HYPER: S21-S41
D/K: R1-R12, 

R21-R69

Picture Tube:
Flat Display FD Trinitron

:1/

21-pin scart connector

 (CENELEC 

standard)

 including 

audio/video

input, RGB input, TV audio/
video output.

Front Terminals
…2  video input – phono jack

   2  audio input – phono jack
          headphones jack 

Ecological Paper- Totally Chlorine Free   

 

Sound Output:
• KV-21LT1K: 

1 x 8 W (music power)
1 x 4 W (RMS Mono)

• KV-14LT1K:

1 x 6 W (music power)
1 x 3 W (RMS Mono)

Power Consumption:
• KV-21LT1K: 55 W
• KV-14LT1K: 42 W

≤

 0.55 W

Dimensions (w x h x d) :
• KV-21LT1K: Approx. 514 x 478 x 487 mm.
• KV-14LT1K: Approx. 393 x 358 x 415 mm.

Weight:
• KV-21LT1K: Approx. 24 Kg.
• KV-14LT1K: Approx. 11.5 Kg.

Accessories supplied:
1 Remote Control (RM-887)
2 Batteries (IEC designated) 
1 Aerial (only for KV-14LT1K)

Other features:
• Teletext, Fastext, TOPtext
• Sleep Timer
• Wake UP Timer
• Smartlink (direct link between your TV set
  and a compatible VCR. For more

information on Smartlink, please refer to

  the Instruction Manual of your VCR).
• TV system Autodetection.

 

  Here are some simple solutions to the problems which may affect the picture and sound.

No picture (screen is dark) and no 
sound.

Poor or no picture (screen is dark), 
but good sound.

No picture or no menu information 
from the equipment connected to the 
Scart connector.

Good picture, no sound.

No colour on colour programmes.

Distorted picture when changing 
programmes or selecting teletext.

Picture slanted (only for 
KV-21LT1K)

Noisy picture when viewing a TV 
channel.

Remote control does not function.

The standby indicator  

 on the TV 

flashes even though the “On Timer” 

• Check the aerial connection.
• Plug the TV in and press the 

 button on the front of

 TV. 
• If the standby indicator 

 is on, press 

 button on

  the remote control. 

• Using the menu system, select the “Picture 

Adjustment” menu and select “Reset” to return to the

 factory settings.

• Check that the optional equipment is on and press the
   

 button repeatedly on the remote control until the

  correct input symbol is displayed on the screen. 

• Press the  

 +/- button on the remote control. 

• Using the menu system, select the “Picture 

Adjustment” menu and select “Reset” to return to 
factory settings.

• Turn off any equipment connected to the Scart
  connector on the rear of the TV.

• Using the menu system, select the “Picture Rotation”
  option in the “Advanced Features” menu to correct the
 picture slant.

• Using the menu system, select the “Manual 

Programme Preset” menu and adjust Fine Tuning

  (AFT) to obtain better picture reception.
• Using the menu system, select the “Noise Reduction”
  option in the “Advanced Features” menu and select
  “On” to reduce the noise in the picture.

• Replace the batteries.

• Contact to your nearest Sony service centre.

In case of problems, have your TV serviced by qualified personnel. Never open the 
casing yourself.