Read Sony KP-FWS57M31 / KP-FWS57M91 Service Manual online
– 19 –
KP-FWS57M31/FWS57M91
RM-1007
PIC
SOU
DRCV
LUMA
YCTM
YCTS
YCTC
MCP
MID1
VSW
MID3
MID2
PFOP
* : When it moves from PJE to other categrys,
repeat 1 or 4 button and press it.
PFID
AP
GRN
PJE*
DDEV
COLR
CLTY
DEF1
DEF2
CRNR
RNR
MSMO
3CM
POWR
GUID
MIDE
CCPM
COMB
DEF3
DEF4
DEF5
BNR
SNNR
AWID
OSDP
ASEL
VSEL
OPM
OPB
SRV
OSD
MSP
TEXT
3-8-5. How to Write the Data
1. Set in the service mode.
2. Press “1” or “1” button on the commander, select the ad-
justment item, and press “3” or “6” button to change the
data.
3. Press “
(MUTE)” button on the commander and it will indi-
cate “WRITE” on the screen.
4. Press “-” button on the commander to write into memory (The
“WRITE” display will be changed to red color while
executing, and back to “SERVICE”.).
Note : Before changing to other modes, press “
(MUTE)” +
“-” buttons on the commander to write the data.
(Omission of this operation causes the data to be returned
to the data before adjustment.)
: Confirm the adjustment mode before writing data for data
values because to vary in each adjustment mode.
: The adjustment item that there are no relations in the ad-
justment is not to change data values because all items are
written in each adjustment mode.
3-8-6. Memory Write Confirmation Method
1. After adjustment, turn off the AC main power switch off.
2. Turn the power switch ON and set in service mode.
3. Call the adjustment items again to confirm adjustments were
made.
3-8-3. Method of Cancellation from Service Mode
1. Set the standby mode (Press “
(TV STANDBY)” button on
the commander), then press “
(TV STANDBY)” button
again, hereupon it becomes TV mode.
3-8-4. How to Adjustments
1. Set in the service mode, the following screen will appear.
2. Press “1” or “4” button on the commander to select the ad-
justment item.
3. Press “3” or “6” button on the commander to change the
adjustment data.
4. Move “
” up or down to select the adjustment category.
When move “
” up (category up), service mode changes in
the order as shown below.
OSD 0 OSV
32
SERVICE 60 480IL
000Q 3.1M 0010 0000 20 00 00 0000
Category Name Item Name
Mode
Item No.
Suffix No.
Total Power On time
(Hours)
(Hours)
Software
Version
Data
50 : PAL, SECAM
60 : NTSC
60 : NTSC
Button
Mode
Description
+ -
WRITE
Writes data to NVM.
7
+ -
READ
Reads data from NVM.
8
+ -
NORMAL
All user control goes to the standard.
5
+ -
INITIAL
Service data initialization. Not stored.
(Be sure not to use usually)
2
+ -
COPY
Do not operate with a remote
commander.
+ -
WRT5060 (The data vary with among mode.)
Commander Function (Except PJE mode)
Click on the first or last page to see other KP-FWS57M31 / KP-FWS57M91 service manuals if exist.