Read Sony KP-48V75 / KP-53V75 / KP-61V75 Service Manual online
– 9 –
Getting Started
13
-EN
EN
Connecting a DVD player without component video output connectors
Connect VIDEO 1/3 connectors on the projection TV to
line output connectors on the DVD player.
line output connectors on the DVD player.
Notes
• Connect your DVD player directly to your TV. Connecting the
DVD player through other video equipment will cause
unwanted picture noise.
unwanted picture noise.
• If your DVD player does not have S video output connector,
use composite video connector for the video connection.
• Video signals are composed of Y (luminance) and C (chroma)
signals. The S connection sends the two signals separately
preventing degradation, and gives better picture quality
compared to conventional connections.
preventing degradation, and gives better picture quality
compared to conventional connections.
• Because the high quality pictures on a DVD disc contain a lot of
information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page
31
).
(continued)
S VIDEO
RK-74A
(not supplied)
(not supplied)
Audio
outputs
outputs
S video
output
output
AUDIO-L (white)
AUDIO-R (red)
YC-15V/30V
(not supplied)
(not supplied)
DVD
VIDEO 1 VIDEO 3
S VIDEO
VIDEO
L
R
AUDIO
(MONO)
TV
IN
OUT
MONITOR AUDIO
(VAR/FIX)
LINE OUT
S VIDEO OUT
COMPONENT VIDEO OUT
S-LINK
DIGITAL OUT
OPTICAL
COAXIAL
R - A U D I O 1 - L
VIDEO
Y
C
B
C
R
TV
Rear of projection TV
14
-EN
Getting Started
Connecting a DVD player with component video output connectors
Component video terminals Y/C
B
/C
R
provide a
sharper, higher resolution picture by reducing the
amount of signal processing thus creating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 IN on the
projection TV in the following way.
amount of signal processing thus creating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 IN on the
projection TV in the following way.
Notes
• Connect your DVD player directly to your TV. Connecting the
DVD player through other video equipment will cause
unwanted picture noise.
unwanted picture noise.
• When the DVD player is connected using VIDEO 4 IN, its
MONITOR OUT signals cannot be output.
• Some DVD player connectors may be labeled Y, B-Y, and R-Y.
In this case, connect Y (green) on the projection TV to Y on the
DVD player, C
DVD player, C
B
(blue) to B-Y, and C
R
(red) to R-Y.
• The jacks of this projection TV are colored in green (Y), blue
(C
B
), and red (C
R
). If line output connectors of your DVD player
have different colors, make connections according to their
labels.
labels.
• Because the high quality pictures on a DVD disc contain a lot of
information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page
31
).
• If the incorrect colors appear when using this component video
input, recheck the connections they may be reversed.
Rear of projection TV
DVD
Audio
outputs
outputs
Component video
outputs
outputs
RK-74A
(not supplied)
(not supplied)
VMC-10HG
(not supplied)
(not supplied)
C
R
(red)
C
B
(blue)
Y (green)
AUDIO-R (red)
AUDIO-L (white)
LINE OUT
S VIDEO OUT
COMPONENT VIDEO OUT
S-LINK
DIGITAL OUT
OPTICAL
COAXIAL
R - A U D I O 1 - L
VIDEO
Y
C
B
C
R
C
B
C
R
Y
CONTROL S
OUT
L
R
AUDIO
VIDEO 4
IN
VIDEO4
TV OUT
VIDEO1
VIDEO3
S-LINK
Click on the first or last page to see other KP-48V75 / KP-53V75 / KP-61V75 service manuals if exist.