Read Sony KLV-40Z450A / KLV-46Z450A / KLV-52Z450A Service Manual online
– 17 –
KLV-40, 46, 52 Z450A
RM-GA012
4-1-8. Dressing of Connector Assy 12P, Connector Main Assy (BG1V to H1VM) and LVDS Connector.
4-1-7. Dressing of Connector Main Assy, Connector Assy 8P, Connector Assy 20P, Connector Assy 4P
and LVDS Connector at Main Bracket.
Conn Assy 20P
G6 PWB
BG1V PWB
AWF
PWB
PWB
Conn Assy 4P
Ensure that LVDS
Conn is dressed
straight up and keep
away from heat sink
Conn Assy 8P
OK
NG
Ensure LVDS connector is not twisted during insertion.
Heat
Sink
Attach Tape, Sheet
Core C (2x) to Conn
Main Assy & LVDS
Conn on Main
Bracket
Attach Tape,
Sheet Core C
(3x) fully to
Conn Main
Conn Main
Assy, Conn
Assy, 8P, Conn
Assy 4P, &
Conn Assy 20P
at Main Bracket
at Main Bracket
Ensure all the
connectors is
dressed neatly on
Main Bracket & not
underneath as
shown.
Conn
Assy
12P
Assy
12P
Conn Assy 8P /
Conn Main Assy
Conn Assy 4P /
Conn Assy 20P /
Conn Main Assy
Dress Conn Main Assy
above Conn Assy 12P
and underneath LVDS
and underneath LVDS
Conn as shown
Conn Main
Assy
Conn Assy 8P
goes underneath
Conn Main Assy.
Conn Main Assy.
Frame VESA Top (L)
Datum: Align with edge of
Panel TCON Foil
Attach Tape, Sheet Core C to Conn Assy
12P & Conn Main Assy on Frame Spine
(L) as shown to keep wire away from
Frame VESA Top (L) sharp edge area.
Ensure LVDS connector is fully
inserted into TCON as shown.
Frame VESA
Top (L) Sharp
Edge
Panel TCON Foil
Frame Spine (L)
Attached Tape, Sheet Core
C to LVDS connector on
side of Frame VESA Top (L).
Ensure no stress on LVDS
connector
Panel TCON
Shield Case
Attach Tape, Sheet Core C to Conn Assy 12P and Conn
Main Assy (BG1V to H1VM) on Panel TCON Shield Case
as shown. Tape firmly & ensure there is no gap in
between
Insert Conn Assy 12P
& Conn Main Assy
(BG1V to H1VM) to
Slide Clamp on Frame
Spine (L).
1
2
4
3
1
2
3
4
5
Frame Spine (L)
Click on the first or last page to see other KLV-40Z450A / KLV-46Z450A / KLV-52Z450A service manuals if exist.