Read Sony KLV-40Z450A / KLV-46Z450A / KLV-52Z450A Service Manual online
– 14 –
KLV-40, 46, 52 Z450A
RM-GA012
SECTION 4
WIRE DRESSING
CAUTION :
1. Do not overpull the wires during dressing
1. Do not overpull the wires during dressing
--> avoid disconnection of wires.
2. Make sure wires are kept away from
sharp edges, heatsinks & other
high-temperature parts.
high-temperature parts.
Caution: Ensure MDF61 Conn Assy is fully
insert and push to lock in the direction as
indicated by arrow.
insert and push to lock in the direction as
indicated by arrow.
4-1-1. Overview
4-1-2. Dressing of MDF61 Connector Assy and XA Connector Assy 7P.
D4Z PWB
Balancer
Balancer
D4Z PWB
D4Z PWB
Balancer
Connect MDF61 Connector Assy straight as
shown. Ensure insulation jacket is not trapped
inside connector during insertion.
MDF61 Connector Assy
After connected MDF61
Conn Assy, bring D4Z PWB
together with bracket down
& screw
Connect XA Connector
Assy 7P to D4Z PWB &
Balancer.
1
2
3
4-1. KLV-40Z450A
Hook
Slide
Clamp
Clip, wire
Click on the first or last page to see other KLV-40Z450A / KLV-46Z450A / KLV-52Z450A service manuals if exist.