Read Sony KLV-19T400A / KLV-19T400G / KLV-19T400W Service Manual online
– 15 –
KLV-19T400A,T400G,T400W
RM-GA013
5-1. Accessing Diagnostic Menu
1.
While TV set on standby, press the following sequence on
the Remote commander (RMGA013).
the Remote commander (RMGA013).
The following menu will appear on the screen
2.
To quit the diagnostic menu, turn off and on the set.
5-2. Viewing the Service Mode Display
1.
While TV on standby mode, press the following sequence
on the Remote commander.
on the Remote commander.
(if wrong key is pressed or passed 3 seconds during each
process, cancel entering the self-diagnosis display.)
process, cancel entering the self-diagnosis display.)
Example on screen display:
2.
To reset, press 8 – 0 – .
3.
To Exit, press the <I/
1
> key .
SECTION 5
SERVICE ADJUSTMENTS
Figure 1
On screen
display
Channel 5
Volume (-)
POWER
MAIN_POWER_ERROR
5V_POWER_ERROR
AUDIO_ERROR
AUDIO_ERROR
BALK_LIGHT_ERROR
TEMP_ERROR
0
0
0
0
0
5-3. Control keys via Remote Commander.
Buttons on the Remote Commander to access the service
menu items and adjust the data values.
menu items and adjust the data values.
5-4. Adjustment Method
5-4-1. Aging
1.
While TV on standby mode, press the following sequence
on the Remote commander.
on the Remote commander.
2.
Select AGING with
2
or
5
On the Remote Commander.
3.
Select AGING MODE with
1
or
4
On the Remote
Commander.
4.
Select data value with
3
or
6
On the Remote
Commander to 1 to enable. Refer to Service Items
(Table 1) page 17
(Table 1) page 17
5.
Press <I/
1
> to exit.
6.
When exit it will have the new data value and start aging.
7.
Aging condition:
a) Supply voltage : Rating
b) Time: More than 20 minutes
c) Ambient Temp: 22-28 degrees
d) Input : Set no signal except digital and analog
RF(Video/Component/PC)
b) Time: More than 20 minutes
c) Ambient Temp: 22-28 degrees
d) Input : Set no signal except digital and analog
RF(Video/Component/PC)
Example on screen display:
On screen
display
Channel 5
Volume (+)
POWER
T V S E R V I C E
0 0 0
0 0 0
B
M E
0 0 0 W P R _
2 5 5
L O C T O P P R O G R A M :
G T V :
M R 1 . 0 . 2
N V M :
T D 0 . 1 0 0
PROGRAM: Show the Application
version
GTV: Show the
GTV Libra
r
y version
NVM:
Show the NVM version in the NVM data
(4bytes ASCII data)
[Data]
Within 7 characters
[Category/Item name] Within 17
characters
T M 0 . 0 7 0
W
Categry
Item
C
W
On screen
display
Channel 5
Volume (+)
POWER
PROGRAM: Show the Application version
GTV: Show the GTV Library version
NVM: Show the NVM version in the NVM data
(4bytes ASCII data)
GTV: Show the GTV Library version
NVM: Show the NVM version in the NVM data
(4bytes ASCII data)
T V
0 0 0
0 0 0
L O C T O P
A G I N G
A G I N G
P R O G R A M :
G T V :
N V M :
M O D E
S E R V I C E
T M 0 . 0 7 0
M R 1 . 0 . 2
T D 0 . 1 0 0
1
Click on the first or last page to see other KLV-19T400A / KLV-19T400G / KLV-19T400W service manuals if exist.