Read Sony KF-WE42S1 / KF-WE50S1 / KF-WS60S1 Service Manual online
– 7 –
KF-WE42S1/WE50S1/WS60S1
RM-1022
RM-1022
RM-1022
5.
Self-Diagnosis function operation
•
3 :
Lamp cover
The rib at the back of the lamp cover closes the SW on T board to ground pin 3 of
CN8001.It’s monitored by the DE-micro (Pin 94 of IC6902) and turns off the lamp when
it’s open.
•
4 :
Fan
Fan rotation is detected by “FAN-PROT”and the DE-micro (Pin 92 of IC6902) turns off the
lamp when it’s “high”.
•
4 :
Temp
When the temperature sensor on the H3 board (WE) or H4 board (WF/XS) detects high
temperature or IIC-E line connector (CN6022:G2 board, CN44: H3/H4 board)is not sested
securely, DE-micro turns off the lamp.
•
5 :
Lamp driver
When the “LAMP-PROT” (pin 95) is low, lamp is not turned on.
If the “LAMP-HV-DET” (pin 96) is low at the same time, it is classified as no high voltage
of the lamp driver.
•
6 :
Low B error
When no “DD 6V” is detected, pin 129 of TV-micro is low and it turns off the main power.
•
8 :
D-OVP
When overvoltage of “+3.3V” or “+2.5V” is detected, pin 126 of TV-micro is low and it
turns off the main power.
•
9 :
Audio
When DC voltage is detected at the speaker or woofer outputs, pin 128 of TV-micro is low
and it turns off the main power.
•
LAMP :
Lamp
When the “LAMP-PROT” (pin 95) is low, lamp is not turned on.
If the “LAMP-HV-DET” (pin 96) is high at the same time, it is classified as no lamp or dead
lamp.
•
The failure record is not automatically cleared.
So after repair, be sure to check the record and set it to “0” manually.
< To clear the failure record >
If the screen display is already on, the following step 1 and 2 can be skipped.
1.
Power off (Set to the standby mode)
2.
DISPLAY
t
Channel 5
t
Vol -
t POWER
3.
Channel 8
t
ENTER
< To clear the Self-diagnosis screen display >
•
The self-diagnosis screen display is cleared by turning off the set with a remote commander or the power switch.
Click on the first or last page to see other KF-WE42S1 / KF-WE50S1 / KF-WS60S1 service manuals if exist.