Read Sony KF-E42A10 / KF-E50A10 (serv.man5) Service Manual online
14
KF-E42A10/E50A10
KF-E42A10/E50A10
SECTION 1: DISASSEMBLY
1-1. OVERVIEW
The connectors in the MIX5 chassis have been redesigned to ensure they are securely fasten to the boards. Please review the
illustrations below.
TOOLS NEEDED
Long Phillips Screwdriver
Needle Nose Pliers
Small Flathead Screwdriver or Jewelers
Screwdriver
LIFT ONE SIDE AT A TIME
BY PUSHING TAB IN WITH
SMALL SCREWDRIVER
TYPE 1
TYPE 2
SQUEEZE DOWN ON
TAB TO RELEASE
SQUEEZE LOCKING TAB
TOWARDS CONNECTOR
BEFORE PULLING FREE
TYPE 3
CAUTION! IF THE TYPE 2 FEMALE
CONNECTOR HAS A SLOT (AS SHOWN)
MAKE SURE THE LOCK TAB SEATS INSIDE
THIS SLOT.
Use caution not to rock the Type 2 or Type 3 connectors when removing or reinstalling to avoid breaking the solder leads off the
Printed Circuit Boards.
Note: Please refer to the Wire Dressing section of this manual
for detailed instructions on reassembling the TV
Click on the first or last page to see other KF-E42A10 / KF-E50A10 (serv.man5) service manuals if exist.