Read Sony KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U Service Manual online
–
17
–
KF-50/60SX300
RM-906
Remote Control Configuration for VCR or DVD
In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and
most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the
remote control needs to be configured.
most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the
remote control needs to be configured.
To do this:
• Before you start, look up the 3 digit code for your brand of DVD or VCR from the list below.
On those brands that have more than one code, enter the first code number.
• A small label is added inside the battery door to allow you to record your brand codes.
1
Press the Media Selector button until the required green light (VCR or
DVD) is lit (see fig. 1).
2
Before the green light goes out, press and hold the yellow button for
approximately 6 seconds until the green light (VCR or DVD) starts
flashing (see fig. 2.).
flashing (see fig. 2.).
3
While the VCR and DVD lights are flashing, enter all three digits of the
code for your brand of VCR or DVD (see the list below) using the number
buttons on the remote control (see fig. 3).
buttons on the remote control (see fig. 3).
If your selected code is entered correctly, the three green lights will
be lit momentarily. Otherwise repeat all the above steps.
4
Turn on your VCR or DVD and check that the main functions work.
• If your device is not working or some of the functions do not
work please check that you entered the correct code set or try
the next code listed against the brand.
the next code listed against the brand.
• Not all brands are covered and not all models of every brand may be covered.
5
Always remember to press Media Selector
button until the green light iluminates according to
the equipment you want to operate with this remote control: VCR, TV or DVD.
VCR Brand List
DVD Brand List
Brand Code
Brand
Code
SONY (VHS)
301, 302, 303, 308, 309,362
SONY (BETA)
303, 307, 310
SONY (DV)
304, 305, 306
AIWA
325, 331, 351
AKAI
326, 329, 330
DAEWOO
342, 343
GRUNDIG
358, 355, 360, 361, 320, 351, 366
HITACHI
327, 333, 334
JVC
314, 315, 322, 344, 352, 353, 354, 348, 349
LG
332, 338
LOEWE
358, 355, 360, 361, 320, 351
MATSUI
356, 357
ORION
328
PANASONIC
321, 323
PHILIPS
311, 312, 313, 316, 317, 318, 358, 359,
363, 364
363, 364
SAMSUNG
339, 340, 341, 345
SANYO
335, 336
SHARP
324
THOMSON
319, 350, 365
TOSHIBA
337
fig. 1
6 sec.
fig. 2
fig. 3
SONY
001, 029, 030, 036, 037, 038, 039, 040,
041, 042, 043, 044, 053, 054, 055
041, 042, 043, 044, 053, 054, 055
AIWA
021
AKAI
032
DENON
018, 027, 020, 002
GRUNDIG
009, 028, 023, 024, 016, 003
HITACHI
025, 026, 015, 004, 035
JVC
006, 017
KENWOOD
008
LG
015, 014, 034
LOEWE
009, 028, 023, 024, 016, 003
MATSUI
013, 016
ONKYO
022, 033
PANASONIC
018, 027, 020, 002, 045, 046, 047
PHILIPS
009, 028, 023, 024, 016, 003, 031
PIONEER
004, 050, 051, 052
SAMSUNG
011, 014
SANYO
007
SHARP
019, 027
THOMSON
012
TOSHIBA
003, 048, 049
YAMAHA
018, 027, 020, 002
Optimum Viewing Area
For the best picture quality, try to position the TV set so that you can view the screen from within the areas
shown below.
shown below.
(Optimum viewing position)
65º
65º
Horizontal viewing area
Vertical viewing area
(Optimum viewing position)
30º
30º
KF-50SX
300K: 1.8
m and m
ore
KF-60SX
300K: 2.2
m and m
ore
KF-50SX
300K: 1.8
m and m
ore
KF-60SX
300K: 2.2
m and m
ore
Click on the first or last page to see other KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U service manuals if exist.