Read Sony KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U Service Manual online
–
12
–
KF-50/60SX300
RM-906
The Features Menu
The “Features” menu allows you to alter vari-
ous settings of the TV.
ous settings of the TV.
To do this:
Press the MENU button and press
v
twice to
select
, then press OK to enter this menu.
Next press
v
or
V
to select the desired option
and press OK. Finally read below how to
operate into each option.
operate into each option.
AUTO FORMAT
This option allows you to automatically change the aspect ratio of the screen.
To do this:
After selecting the option, press OK. Then press
After selecting the option, press OK. Then press
v
or
V
to select On (if you wish the TV set to
automatically switch the screen format according to the broadcast signal) or Off (if you wish to
keep your preference). Finally press OK to store.
keep your preference). Finally press OK to store.
Even if you have selected “On” or “Off”, you can always modify the format of the screen by
pressing
pressing
repeatedly on the remote control to select one of the following formats:
SMART: Imitation of wide screen effect for 4:3 broadcast.
4/3:
Conventional 4:3 picture size, full picture
information.
14/9:
Compromise between 4:3 and 16:9 picture size.
ZOOM: Widescreen format for letterbox movies.
WIDE:
For 16:9 broadcast. Full picture information.
• In “SMART”, “ZOOM” and “14/9” modes, parts of the top and bottom of the screen are
cut off. Press
v
or
V
to adjust the position of the image on the screen (e.g. to read subtitles).
• Only "WIDE" and "4/3" modes can be selected for an RGB signal connected to the PC
connector.
• According to the format of diffussion, black bands can always appear whatever the selected
mode.
,
m
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset
Noise Reduction:
On
Colour Tone:
Cool
Select:
Enter:
OK
Exit:
MENU
Features
Auto Format
On
AV3 Output
TV
Connection Guide
Features
Auto Format
On
AV3 Output
TV
Connection Guide
Select:
Back:
Enter: :
OK
4:3
ZOOM
14:9
WIDE
SMART
AV3 OUTPUT
This option allows you to select the source to be output from the Scart connector
3/
3 so that you can record from this Scart any signal coming from the TV or from an
external equipment connected to the Scart connector
1/
1,
2/
2 or front connectors
4 or
4 and
4.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
Once you have entered into the "Features" menu as it is explained in the previous page and after
selecting the option, press OK. Then press
Once you have entered into the "Features" menu as it is explained in the previous page and after
selecting the option, press OK. Then press
v
or
V
to select the desired output signal:
TV
to output the aerial source.
AV1
to output sources connected to
1/
1.
AV2
to output sources connected to
2/
2.
AV4
to output sources connected to
4 or
4 and
4.
AUTO to output the signal that is being viewed on the TV.
• If you select “AUTO”, the output signal will always be the same one that is displayed on
the screen.
• If you have connected a decoder to the Scart
3/
3 or to a VCR connected to this
Scart, please remember to change back the “AV3 Output” to “TV” for correct
unscrambling.
unscrambling.
CONNECTION GUIDE
Even you have already connected the external equipment to the TV set, it is important for you to
follow the instructions of this menu. If you proceed in this way, you will get the optimum picture
settings related with the optional equipment.
follow the instructions of this menu. If you proceed in this way, you will get the optimum picture
settings related with the optional equipment.
To do this:
1
Once you have entered the "Features" menu as it is explained in the previous page and after
selecting the option, press OK. Next press
selecting the option, press OK. Next press
v
or
V
to chose the equipment you want to connect
among the available: SAT (satellit), Decoder, DVD, GAME, VIDEO or DVD rec. (DVD
recorder). Next press
recorder). Next press
b
to select the equipment chosen (equipment selected also can be deleted
by pressing
B
). Once you have selected all the equipment to be connected, press
v
or
V
to
select "Confirm" and press OK.
2
A new menu will appear showing you on which Scart connector of the rear of the TV should be
connected each equipment. Please connect each equipment according to this information to get
the optimum picture setting of the optional equipment.
connected each equipment. Please connect each equipment according to this information to get
the optimum picture setting of the optional equipment.
3
Once you have connected the optional equipment, press
B
or
b
to select "OK" and finally press
the OK button of the remote control.
We strongly recommend you to follow our connection proposals, but in case you do not agree press
B
or
b
to select «No» and next press the OK button. A new menu appears on the screen in which you
can assign the connections according to your preferences.
RGB CENTRING
This option is only available if an RGB source has been connected to the TV.
This option allows you to readjust the horizontal position of the picture in case you need to do it
when connecting an RGB source.
when connecting an RGB source.
To do this:
Once you have entered the "Features" menu as it is explained in the previous page and while
watching an RGB source select the “RGB Centring” option and press OK. Then press
Once you have entered the "Features" menu as it is explained in the previous page and while
watching an RGB source select the “RGB Centring” option and press OK. Then press
v
or
V
to
adjust the centre of the picture between –5 and +5. Finally press OK to confirm and store.
S
S
S
S
Click on the first or last page to see other KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U service manuals if exist.