Read Sony KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U Service Manual online
–
11
–
KF-50/60SX300
RM-906
The Sound Adjustment Menu
The “Sound Adjustment” menu allows you to
alter the sound settings.
alter the sound settings.
To do this:
Press the MENU button and press
Press the MENU button and press
v
to select
, then press OK to enter this menu. Next
press
v
or
V
to select the desired option and
press OK. Finally read below how to operate
into each option.
into each option.
Sound
This option allows you to customise the Sound Effect. After selecting this
Effect
option press OK. Next press repeatedly
v
or
V
to select:
Off
(Flat response).
Natural
(Enhances clarity, detail and presence of sound by using “BBE High
Definition Sound system”*).
Dynamic (“BBE High Definition Sound system”* intensifies clarity and
presence of sound for better intelligibility and musical realism).
Dolby**
(Dolby Virtual, simulates the sound effect of “Dolby Surround Pro
Virtual
Logic”).
Once you have selected your desired option, press OK to store.
Treble
Press
B
or
b
to decrease higher-frequency sounds. Next press OK to store.
Bass
Press
B
or
b
to decrease or to increase the lower-frequency sounds. Next press
OK to store.
Balance
Press
B
or
b
to emphasise the left or the right speaker. Next press OK to store.
Reset
Press OK to reset the sound to the factory preset levels. Next press OK to store.
Dual Sound
• For a Stereo broadcast:
Press
v
or
V
to select Stereo or Mono. Next press OK to store.
• For a bilingual broadcast:
Press
v
or
V
to select Mono (for mono channel if available), A (for channel 1)
or B (for channel 2). Next press OK to store.
,
m
Sound Adjustment
Sound Effect:
Dolby Virtual
Treble:
Bass:
Balance:
Reset
Dual Sound:
Bass:
Balance:
Reset
Dual Sound:
Stereo
Auto Volume:
Off
TV Speakers:
On
Headphones Set Up
Select:
Enter:
OK
Exit:
MENU
Picture Adjustment
Select:
Enter:
OK
Exit:
MENU
Picture Mode:
Live
Contrast:
Reset
Noise Reduction:
On
Colour Tone:
Cool
Sound Adjustment
Sound Effect:
Dolby Virtual
Treble:
Bass:
Balance:
Reset
Dual Sound:
Bass:
Balance:
Reset
Dual Sound:
Stereo
Auto Volume:
Off
TV Speakers:
On
Headphones Set Up
Select:
Back:
Enter:
OK
continued...
Auto Volume Press
v
or
V
to select On (the volume level of the channels will stay the same,
independent of the broadcast signal, e.g. in the case of advertisements) or Off (the
volume level changes according to the broadcast signal). Next press OK to store.
volume level changes according to the broadcast signal). Next press OK to store.
If you select “Dolby Virtual” on the “Sound Effect” option, the “Auto Volume” option will
automatically be switched to “Off” and vice versa.
automatically be switched to “Off” and vice versa.
TV Speakers
This option allows you to select if you want to listen the TV from the TV speakers
or from an external amplifier connected to the audio outputs on the rear of the TV.
or from an external amplifier connected to the audio outputs on the rear of the TV.
After selecting this option, press OK. Next press repeatedly
v
or
V
to select:
On
(to listen the TV from the TV set speakers).
One time off
(to listen to the TV from the external amplifier only one
time. By using this option, any time the TV is turned
off/on, it returns to the default setting "On").
Permanent off (to always listen to the TV from external amplifier).
Once you have selected your desired option, press OK to store.
If you have selected "One time off" or "Permanent off", the volume of the external equipment
can also be altered by pressing the
can also be altered by pressing the
2 +/- buttons of the remote control. When the volume
buttons are pressed, the symbol
%
will appear indicating that the volume you are altering is
not the volume of the TV set speakers, it is from the external equipment.
Headphones Set Up
This option allows you to customise the headphones volume and the
PAP settings (refer to page 21 for details on PAP).
PAP settings (refer to page 21 for details on PAP).
After selecting this option press OK. Next press repeatedly
v
or
V
to select:
volume
Press
B
or
b
to decrease or increase the volume level
from the headphones.
Dual Sound • For a Stereo broadcast:
Press
v
or
V
to select Stereo or Mono
• For a bilingual broadcast:
Press
v
or
V
to select Mono (for mono channel if
available), A (for channel 1) or B (for channel 2).
PAP Sound
Select Frame if you want to listen to
the active screen (framed) of the PAP screen (see page
21), select Left picture if you want to listen to the left
screen or select Right picture if you want to listen to
the right screen.
21), select Left picture if you want to listen to the left
screen or select Right picture if you want to listen to
the right screen.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under
license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No.
4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create surround sound effect by simulating the sound of four
speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for
details refer to page 25).
The sound effect can also be improved by connecting a suitable external amplifier (for
details refer to page 25).
** Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Click on the first or last page to see other KF-50SX300 / KF-50SX300K / KF-50SX300U / KF-60SX300 / KF-60SX300K / KF-60SX300U service manuals if exist.