Read Sony KF-50SX100HK / KF-50SX100MN Service Manual online
– 15 –
KF-50SX100HK/50SX100MN
K
RM-903
SECTION 3
ELECTRICAL ADJUSTMENTS
3-1. ADJUSTMENTS WITH COMMANDER
Service adjustment to this model can performed with the supplied
remote commander RM-903.
1. Selection of Mode Between PAL and NTSC
PAL mode : Enter PAL signal with color burst.
NTSC mode : Enter NTSC signal with color burst. (VIDEO
input only)
2. Selection of Screen Format
1) Press “
(BLUE)” button on the commander.
2) Press v or V key on the joystick to select screen format and
press “
(OK)” button. At this time, normal screen comes
back. (In the TT mode, the menu is switched to the Service
menu.)
3-1-1. How to Enter TT Mode
1. Turn on the main power switch to place this set in standby
mode. (LED will light in red.)
2. Press the buttons on commander as follows, and the TT
mode will be selected.
“TT - -” will appear in the top right corner of the screen.
Other status information will also be displayed.
Service AE5(A)
Initialising
Reset Devices
Monitoring
Device Register Setting
Special Adjustment
Reset Devices
Monitoring
Device Register Setting
Special Adjustment
Select :
v V
Next menu :
B
3. Press “-” + “-” on the commander. If “
(TV MODE)”
button is pressed, the set exits from the TT mode and returns to
normal TV mode.
3-1-2. How to Enter Service Menu
1. Select TT mode.
2. Press “MENU” button on the commander once, and normal
menu screen will appear, or press it once more, and the follow-
ing service menu screen will appear.
3. Following the screen, press v or V key on the joystick to se-
lect the desired item, and press B key to enter the selected
item.
4. Press v or V key on the joystick to change data of each item,
and press “
(OK)” button to write changed data.
(Except Projector Engine mode)
5. To return from each item, press b key on the joystick. Or, to
return to the TT mode, press the “MENU” button.
(Except Projector Engine mode)
RM 903
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO
TV
TV STANDBY
ON SCREEN
DISPLAY
DISPLAY
SCREEN
FORMAT
4:3/16:9
FORMAT
4:3/16:9
MUTE
TV MODE
VOLUME +
JOYSTICK
MENU
SONY
RM-903
OK
TV
Enter the
“TT MODE”
5
(DIGIT 5)
(VOLUME +)
(TV MODE)
ON SCREEN
DISPLAY
( )
Initialising
Model Setting
Destination Setting
Basic Setting
Feature Setting
Destination Setting
Basic Setting
Feature Setting
Select :
v V
Next menu :
B
3-1-3. Screen Display for Service Menu
If each item of service menu is selected, the following screen is
displayed.
• Initialising
Click on the first or last page to see other KF-50SX100HK / KF-50SX100MN service manuals if exist.